Owner's manual

Operating Instruction
45
If the AUTO-START is OFF, the unit will not start again in cases of a failure or disconnection.
After restarting is following message is shown:
3.1
NO AUTOSTART
disable inverter
To restart the unit, press at first the and than to start the button.
Press and the display changes to
Note:
All errors are only readable
4. E R R O R 1
.........................
Here, the last error is shown
Press the button to change to
5. E R R O R 2
.........................
Shows the error before the last error
Press the button to change to
6. E R R O R 3
.........................
Shows the error before error 2
Press the button to change to
7. E R R O R 4
.........................
Shows the error before error 3
Press the button to change to
8. E R R O R 5
.........................
Shows the error before error 4
Press the button to change to
9. TOTAL RUN TIME
0000:00
Runtime of the motor.
This time is reset together with the
operating hours.
Press the button to change to
Please Note : All changes have to be saved, that they will not be lost in
case of shut off of the power supply !!
10.
SAVE ???
+
Simultaneously press buttons and
until...: