Replacement Parts List

CAP.
How to use this
PARTS LIST
The pump nameplate identifies the pump by model number, pump construction and
impeller diameter as shown below.
Pump Size
Pump Construction
Pump Series
Date Manufactured
November, 2016
BELL & GOSSETT
e-60
PUMP
BELL & GOSSETT
e-60
PUMP
SIZE
1.25x5.25 4.25 BF
PUMP
Pump Size
SIZE
1.25x5.25 1L61
Capacity &
CAP.
30 GPM 15 FT
Head
MOTOR
.25 HP 1750 RPM
SERIAL
IDENT.
NO.
SERIAL
1EF083LF
Motor
Horsepower
NO.
1598200
1L61
Impeller
Diameter
NO.
Serial Number
Date Manufactured
November, 2016
Part Number
NAMEPLATE FOR
BUILT-TO-ORDER PUMPS
NAMEPLATE FOR
STOCK PUMPS
The BTO nameplate above identifies the pump as a Series e-60, size 1.25x5.25
with Bronze-Fitted (BF) construction. The impeller diameter is 4
1
/4" and the pump is
sized to pump 30 GPM at 15 ft of head. The motor horsepower is 0.25 and the motor
speed is 1750 RPM. The serial number uniquely identifies each individual BTO unit for
future reference.
The Stock Pump nameplate identifies the pump as a Series e-60, size 1.25x5.25,
with date code indicating it was built in November 2016. The part number ca
n be
used to pr
ovide all other pump information through a part number search.
DO NOT REMOVE TH
E NAMEPLATE. It is important when ordering replac
ement parts to furnish
complete
nameplate data. The following procedure will result in proper parts selection:
1. Using the nameplate, determine the model number, pump construction and
impeller diameter.
2. Refer to the index of this document to find the parts breakdown for a specific pump
model.
3. Find the column pertaining to the pump's specific materials of construction (Bronze-Fitted vs All Bronze)
4. Match the Item Number on the table to the numbered drawing on page 4 to help verify correct part
number identification.
3
PARTS LIST CP-107-PL
SERIES e-60