Install Instructions

3 Product Description
3.1 General description
The Series e-60 is an in-line mounted centrifugal pump.
This pump is available for pipe sizes that range from 1 in to 3 inches.
This pump also has available power levels that range from 1/4 to 3 hp and 1750 rpm.
Pump application
WARNING:
California Proposition 65 warning! This product contains chemicals known to the state of
California to cause cancer and birth defects or other reproductive harm.
You can use this pump for these types of applications:
• Hydronic heating and cooling
• Potable hot water
• Industrial fluid transfer
This pump is for indoor use only.
Xylem recommends that you use bronze constructed pumps for pumping potable water.
For other applications, contact your local sales and service representative.
3.2 Operational specifications
Operational limitations
Parameter Value
Maximum working pressure 175 psi
Pump construction Bronze fitted or all bronze
Standard mechanical seal
Mechanical seal specifications
Materials of Construction EPR carbon/silicon carbide EPR SiC/SiC (Graphite
loaded)
FKM carbon/silicon carbide
Standard/optional Standard Optional Optional
Operating temperature
range
-10˚F to 250˚F (-23˚C to
121˚C)
-10˚F to 250˚F (-23˚C to
121˚C)
-10˚F to 225˚F (-23˚C to
107˚C)
pH range 7.0–11.0 7.0–12.0 7.0–9.0
Maximum glycol/water
concentration
50/50% 60/40% 50/50%
Maximum suction pressure Suction Pressure + TDH must not exceed MWP
3 Product Description
8 Series e-60 INSTRUCTION MANUAL