Install Instructions
Manuals
Brands
Bell & Gossett Manuals
Circulator Pumps
3/4 HP e615T Series e-60 Bronze Fitted 2" x 6-1/4" In-Line Pump (3 PH, 575V)
1
2
3
4
5
6
7
8
9
10
Table Of Contents
1 Introduction and Safety
1.1 Introduction
1.2 Safety
1.2.1 Safety terminology and symbols
1.2.2 User safety
1.2.3 Protecting the environment
2 Transportation and Storage
2.1 Inspect the delivery
2.1.1 Inspect the package
2.1.2 Inspect the unit
2.2 Pump lifting
2.3 Long-term storage
3 Product Description
3.1 General description
3.2 Operational specifications
4 Installation
4.1 Preinstallation
4.1.1 Pump location guidelines
4.1.2 Piping checklist
4.1.3 Pump orientation
4.1.4 Special installation
4.2 Connect the wiring
4.2.1 Wiring diagrams
5 Commissioning, Startup, Operation, and Shutdown
5.1 Preparation for startup
5.1.1 Check the rotation
5.2 Lubrication requirements
5.3 Prime the pump
5.4 Start the pump
5.5 Pump operation precautions
5.6 Shut down the pump
6 Maintenance
6.1 Disassembly
6.1.1 Disassembly precautions
6.1.2 Drain the pump
6.1.3 Remove the motor and coupler
6.1.4 Remove the bearing assembly and impeller
6.1.5 Remove the seal
6.2 Pre-assembly inspections
6.2.1 Replacement guidelines
6.3 Reassembly
6.3.1 Reinstall the seal
6.3.2 Reinstall the bearing assembly and impeller
6.3.3 Reinstall the spring type coupler and motor
6.3.4 Reinstall the elastomeric type coupler and motor
6.3.5 Capscrew torque values
6.3.6 Dealer servicing
7 Parts Listings and Cross-Sectional Drawings
7.1 Cross-sectional drawings
8 Product warranty
For questions about possible long-term storage treatment services, please contact your
local sales and service representative.
2 Transportation and Storage
Series e-60 INSTRUCTION MANUAL
7
1
...
...
7
8
9
10
11
...
...
32
