INSTRUCTION MANUAL 6-71-075-111 REVISION A Autocirc® Instant Hot Water Pump Model: ecocirc 23-5 ACT Save water and time with one simple under sink installation.
Preparation for Installation:É Assemble the parts and tools required:É 1. Open and inspect Autocirc pump package.É 2. AutocircÉpump package includes the pump with a built-in ti¿, a 6ft. cord, ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉand wall mounting bracket.É 3. Two stainless steel flexible hoses (1/2” x 3/8”) - length as required. É ÉÉÉÉ(sold separately)É 4. Adjustable wrench and screwdriver.É 5.
Remove the existing flexible line connection to the hot and cold water faucet/tap threaded nipples (see Fig. 3). (TIP: Mark the hot and cold water flexible lines to easily identify them).É Note: If necessary, replace the existing flexible hosesÉ with new stainless steel braided flexible hoses in the lengths required.É É Step 4É Screw on the two existing 1/2” hose connections to the corresponding hot and cold sides of the pump housing (see Fig. 4).
There shall be no other warranty or obligation, expressed or implied, oral or statutory. B&G, its agents, or employees shall in no event be liable for injury to any person, or for any claim for damage, however arising.É B&G shall not be liable for any incidental or consequential damages for breach of any express or implied warranty, breach of contract, negligence, strict liability, or any other legal theory related to this product.
Xylem Inc. 8200 N. Austin Avenue Morton Grove, Illinois 60053 Phone: (847) 966-3700 Fax: (847) 965-8379 www.xyleminc.com/brands/bellgossett Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. © 2012 Xylem, Inc.