Instruction Manual

ManualsBrandsBell & Gossett ManualsAccessories for waterV02300D ThermoMate Thermostatic Control Valves

DESCRIPTION

ThermoMate Thermostatic Control Valves are silent, efficient,

energy saving non-electric control valves that provide reliable

temperature control for hydronic and low pressure steam termi-

nal units. The temperature range of ThermoMate Control Valves

is adjustable between 46°F (7.8°C) and 79°F (26.1°C). A drop in

room temperature causes the operator to open the valve.

INSTRUCTION MANUAL

V02300

Revision D

BELL & GOSSETT

Installation, Operation and Service Instructions

ThermoMate

Thermostatic Control Valves

Bell & Gossett

Morton Grove, IL, U.S.A.

* WARNING: Label Part No. V56871

must be installed in this location.

If missing, must be replaced.

SAFETY

INSTRUCTION

This safety alert symbol will be used in this manual to draw

attention to safety related instructions. When used, the safety

alert symbol means ATTENTION! BECOME ALERT! YOUR

SAFETY IS INVOLVED! FAILURE TO FOLLOW THESE IN-

STRUCTIONS MAY RESULT IN A SAFETY HAZARD.

INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.

FIG. A

Baseboard radiation with Model TM42 angle pattern

valve body and Model TM51 self-contained thermo-

static operator. (Thermostatic operator mounted thru

the side panel of the terminal unit cover.)

Baseboard radiation with Model TM12 angle pattern

valve body and Model TM51 self-contained thermo-

static operator attached to the TM91 remote mount-

ing base and sensing element. (Remote mounting

base and operator mounted thru the front panel of the

terminal unit cover.)

Convertor with Model TM21 straight pattern valve

body and Model TM61 thermostatic operator with

remote sensing bulb attached to the TM91 remote

mounting base. (Remote mounting base and the oper-

ator mounted thru the front panel of the terminal unit

cover.)

Free standing radiator with Model TM42 angle pattern

valve body and Model TM51 self-contained thermo-

static

operator mounted on the radiator.

Free standing radiator with Model TM12 angle pattern

valve body and Model TM61 thermostatic operator

with remote sensing bulb mounted on the wall along-

side of the terminal unit.

Free standing radiator with Model TM12 angle pattern

valve body and Model TM61 thermostatic operator

with remote sensing bulb attached to the TM91

remote mounting base. (Remote mounting base and

the operator are mounted on the wall alongside of the

unit.)

Convector with Model TM21 straight pattern valve

body and Model TM61 thermostatic operator with

remote sensing bulb. (Mounted inside the terminal

unit cover.) Solder adaptor not furnished with valve.

Convector with Model TM12 angle pattern valve body

and Model TM51 self-contained thermostatic operator

attached to the TM91 remote mounting base and

sensing element. (Remote mounting base and opera-

tor mounted on the wall outside of the terminal unit.)

FIG. B

D .GIFC .GIF

FIG. E

FIG. F

FIG. HFIG. G

Summary of content (4 pages)

PAGE 1
BELL & GOSSETT INSTRUCTION MANUAL V02300 Revision D * * * * ThermoMate Thermostatic Control Valves ® * WARNING: Label Part No. V56871 must be installed in this location. If missing, must be replaced. Installation, Operation and Service Instructions INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.
PAGE 2
MAXIMUM OPERATING LIMITATIONS Temperature: Steam Pressure: Working Pressure: Differential Pressure: 250°F (121°C) 15 PSI (103.43 kPa) 200 PSI (1,379 kPa) 1 /2" Valves 25 PSI (172.38 kPa) 3 /4" Valves 20 PSI (137.90 kPa) 1" Valves 15 PSI (103.43 kPa) INSTALLATION INSTRUCTIONS OPERATING INSTRUCTIONS 1. Fig. A through Fig. H shows the various ways the ThermoMate may be installed.
PAGE 3
ADJUSTMENT RANGE Max Temp. °C (Adj 10 11 Setting) Max Temp. °F 46 48 Min. Temp °F 46 48 12 13 14 16 17 18 19 25 26 27 28 50 52 53.6 55.3 57 59 61 63 64.6 66.3 68 69.6 71.3 73 75 77 79 46 46 46 46 46 46 46 46 46 15 46 46 20 46 21 46 22 23 46 46 24 46 46 FIG. I 1 11, 13 FIG. K 2 14, 16 3 17, 19 4 20, 22 5 23, 25 6 26, 28 b) Remove the bonnet and gland assembly by turning the chrome plated bonnet hex nut in a counterclockwise direction.
PAGE 4
INSTALLATION INSTRUCTIONS FOR TAMPER PROOF COVER (See Fig. L) OPERATING INSTRUCTIONS WITH TAMPER PROOF COVER 1. Remove the night set back ring and the shroud from the operator. The set back ring is removed by pulling it up and the shroud is removed by pulling it down. To remove the shroud operator must be removed from the valve body. Once tamper proof cover is installed changes in temperature setting can only be made by removing cover. 2.