Use and Care Manual

2
PRECAUTIONS
If at any time you are unclear about the directions and believe you need further
assistance, contact Bell’O
®
at: 1-888-779-1543 (US/Canada) or [phone]
(International) from 9am – 5pm EST, Monday through Friday.
• NEVER EXCEED THE MAXIMUM LOAD CAPACITY OF:130 LBS (59 KG)
WHEN INSTALLED INTO 2 STUDS OR MASONRY INSTALLATIONS;
OR 80 LBS (36.3 KG) WHEN INSTALLED INTO 1 STUD.
• THIS PRODUCT SHOULD NEVER BE MOUNTED TO METAL FRAMING
STUDS.
• The maximum weight of your television cannot exceed the maximum
weight rating of your mount.
• Wood studs should be 2" x 4", at minimum: 1.5" x 3.5" (38 mm x 89 mm).
Designed to be mounted to 2" x 4" wood studs that are spaced 16" on center.
• This mounting bracket was designed to be installed and utilized ONLY as
specified in this manual. Bell’O International Corp. will not be responsible
for failure to assemble as directed or for the improper assembly, use, or
handling of this product.
• Improper installation of this product may cause damage or serious injury.
Bell'O International Corporation cannot be liable for direct or indirect
damage or injury caused by incorrect mounting, incorrect use, or
incorrect assembly.
• If the mounting bracket will be attached to any structure other than specified in
this manual, only a licensed professional contractor/ installer should perform
this installation. The supporting structure must support, at minimum, four times
the combined weight of the mounting bracket and TV. It is the responsibility and
liability of the installer to ensure the suitability of the supporting structure.
• Check carefully to ensure that there are no missing or damaged parts. Never
use defective parts. To receive replacement or missing part(s) under this
Warranty, visit our website at www.bello-digital.com or call our Customer
Service Department at 1-888-779-1543. Please have the model number, date
code, part number(s) and your sales receipt or other proof of purchase
available for reference. Bell’O will ship you any necessary replacement parts
in the Continental United States or Canada.
• Specifications are subject to change without notice.