Instructions / Assembly

Prepare the Support Brackets:

1-1. Place the M10 Hollow Hex Bolt (SB-SC) into the large

hexagonal opening in Plastic Support Bracket (SB-MP)

as shown in Fig. 5.

If Mounting the Soundbar ABOVE the TV:

1-2. Place the Metal Support Plate (SB-SP) over the M10 Hollow Hex

Bolt (SB-SC) and Plastic Support Bracket (SB-MP) as shown in

Fig. 6. Make sure the Metal Support Plate (SB-SP) is facing the

correct way, with grooves in the holes to allow for the heads of the

Small M4 Screws (AB) as shown.

If Mounting the Soundbar BELOW the TV:

1-2. Place the Metal Support Plate (SB-SP) over the M10 Hollow Hex

Bolt (SB-SC) and Plastic Support Bracket (SB-MP) as shown in

Fig. 7. Make sure the Metal Support Plate (SB-SP) is facing the

correct way, with grooves in the holes to allow for the heads of the

Small M4 Screws (AB) as shown.

1-3. Once in proper position, secure the Metal Support Plate (SB-SP) to

Plastic Support Bracket (SB-MP) using three Small M4 Screws

(AB) into three Small M4 Nuts (AN) on the other side. Make sure

the Small M4 Nuts (AN) are properly fitted into the hexagonal

openings in the other side of Plastic Support Bracket (SB-MP).

1-4. Tighten the Small M4 Screws (AB) using a screwdriver.

1-5. REPEAT Steps 1-1 through 1-4 for 2nd set of Support Brackets.

NOTE: If all parts are correctly installed, the Support Brackets

should appear as shown below:

Fig. 5

Fig. 8

Fig. 9

SB-SC

SB-MP

SB-SP

For mounting soundbar above the TV:

For mounting soundbar below the TV:

FOR KEYHOLE AND SCREW MOUNT SOUNDBARS:

SKIP TO PAGE 8 IF YOUR SOUNDBAR IS THE

MOUNTING BRACKET TYPE AND REQUIRES

THE SQUARE MOUNTING ADAPTERS (A5).

Fig. 6

Fig. 7

SB-SP

SB-MP

SB-SP