Introduction Congratulations on your decision to mount your TV with a TV Wall Mounting Kit For Dummies. The enclosed mounting bracket was engineered and designed by Bell’O International Corporation using the latest computer-aided design and stress-analysis software to ensure safety and durability when installed according to the instructions. It has been further tested and Listed by Underwriters Laboratories. About This Manual Mounting your TV on the wall can seem like an overwhelming task.
Precautions! • This mounting bracket was designed to be installed and utilized ONLY as specified in this manual. Bell’O International Corporation will not be responsible for failure to assemble as directed or for the improper assembly, use, or handling of this product. • Improper installation of this product may cause damage or serious injury. Bell'O International Corporation cannot be liable for direct or indirect damage or injury caused by incorrect mounting, incorrect use, or incorrect assembly.
Parts Included in This Kit n Video for Installatio ting Kits Wall Moun Bell’O TV © Jan 07 uary 20 Bell'O International Corporation C ontent s Video: 701 are s ubject to change without notice logo For Dummies Wiley the Wiley and Man logo the Dummies or registered & Sons Inc related trademarks of John Wiley license trademarks Used by and/or its affiliates rr ep r ti uc od on or dis trib nw utio ut w itho n ritte ission perm ell’O from B International Corp All designs and image s are pr o
Parts Included in This Kit (continued) (D) M4/M5 Short Spacer, Quantity: 6 (E) M4/M5 Long Spacer, Quantity: 6 (Q) M6/M8 Short Spacer, Quantity: 4 (P) M6/M8 Long Spacer, Quantity: 4 (G) M5 x 12mm TV Mounting Screw, Quantity: 6 (H) M5 x 22mm TV Mounting Screw, Quantity: 6 (I) M5 x 30mm TV Mounting Screw, Quantity: 6 (J) M6 x 14mm TV Mounting Screw, Quantity: 4 (K) M6 x 25mm TV Mounting Screw, Quantity: 4 (L) M6 x 35mm TV Mounting Screw, Quantity: 4 (M) M8 x 20mm TV Mounting Screw, Quantity: 4 (N)
Parts Included in This Kit (continued) (W) M4 x 160mm Security Screw, Quantity: 2 (V) Plastic Sleeve for 160mm Security Screw, Quantity: 2 (X) M4 x 16mm Security Screw, Quantity: 2 (U) TOGGLER® brand AF8 ALLIGATOR® Anchor, Quantity: 3 TOGGLER® brand ALLIGATOR® SOLID-WALL ANCHORS are patented under one or more of US Patent numbers 5,161,296 and 5,938,385; and foreign counterparts thereof and of 4,752,170. Other patents pending.
Getting ready to hang the TV Select the location where you want to mount the TV. Clear the area of all furniture and electronics. You will need some elbow room to mount the TV. You also want to make sure that your electronic devices are unplugged, covered, and out of way because you are about to start drilling holes, and that is likely to make dust. You will also need to leave space that you can use to mount the Monitor Plate (MP) onto the TV. Your TV may have come with a stand installed.
Table 1: Standard Monitor Mounting Configurations Width (mm) 75 Height (mm) 200 3.9 4mm 150 7.9 3.9 200 100 3.9 3.0 Screw Size 100 3.0 Height (inch) 100 75 Width (inch) 6mm Standard Standard with Adapter 8190 (AP) with Adapter 8190 (AP) with Adapter 8190 (AP) 200 200 7.9 7.9 5.9 7.
DETAILED VIEW Figure 1 Back of TV MP F, R, or S Selected Screw Use spacers in situations when the arms do not fit firmly against the back of the television, such as when the back of the television is curved, contains larger recessed mounting holes, or some other obstruction is in the way. If your TV requires use of a spacer, the spacer you select must stick out past the back of the TV to ensure proper mounting. You don’t want the spacer to be loose.
Using the 8190 Adapter Plates Some TVs have larger mounting configurations (200 x 200, 200 x 150, or 200 x 100), and the Monitor Plate (MP) alone cannot reach these holes. If this is the case for your TV, you need to use the included 8190 Adapter Plates (AP).
Step 2: Securing the Wall Mount Finding a wood stud to mount to Using a stud finder, determine the exact location of the stud to which you want to attach the wall mount. Using an electronic stud finder works best because it gives you an indication of where the right and left sides of the stud are. After you determine the stud location, mark the right and left side of the stud as shown in Figure 5. These markings help you determine the center location of the stud for proper drilling.
Determining the location of the TV After the Monitor Plate (MP) has been mounted to the TV, you can now measure the distance from the bracket holes to the top and bottom of the TV to help determine the desired height of the TV on your wall. The reason that you need to take these measurements is because many monitors do not have the mounting location centered on the back of the monitor.
Using the Installation Template The Installation Template (IT) included in this kit helps you select the correct positions for drilling the holes for the TV mounting. Figure 7 shows what the holes on the template represent. Figure 7 SECURING HOLE “c” DRILL HOLE “a” DRILL HOLE “b” You must be careful to accurately drill the holes or else the screws may not line up with the holes in your wall mount.
When mounting to a wood stud Line up the Installation Template (IT) with the stud markings to ensure the proper location for your drill holes. After you have the position selected, tape the template in place securely on the wall with masking tape so that you don’t damage the wall surface. Use a level to double check that the screw holes will line up vertically as shown in Figure 8. Drill two holes 2.
When mounting to solid concrete, bricks, or cinder block Figure 9 This kit includes the TOGGLER® brand ALLIGATOR® Anchors (U) for mounting in concrete walls, brick, or cinder block. These patented anchors are the finest solid wall anchors on the market and offer excellent holding ability when properly installed. After you have determined your desired TV location, tape the Installation Template (IT) in place securely on the wall with masking tape.
Figure 10 After the holes are drilled, remove the template and place the ALLIGATOR® Anchor (U) into the concrete wall as shown in Figure 10. U After you have prepared the two holes for mounting the Wall Mount (WM), screw the two bottom Lag Bolts (T) three-quarters of the way into the holes. Leave enough room so that you can slip the wall mount over the screws. Install the wall mount as shown in Figures 8 and 11 without tightening the screws completely.
Step 3: Mounting the TV Preparing the security screws You need to mount the Monitor Plate (MP) onto the Wall Mount (WM). To ensure it does not come off, you use two screws to secure the parts together. You have two choices of screw sizes. For TVs under 20" (508mm) you can use the shorter 16mm Security Screws (X). If your TV is larger than 20" (508mm) you need to use the longer 160mm Security Screws (W) with the Plastic Sleeves (V).
Figure 12B (For TVs over 20") PROFILE VIEW (DETAIL) WM Tip of Screw should be flush with bracket. V W Don’t forget those wires! If your audio, video, and power cables will not be accessible after you mount the TV, you need to make those connections now. Before doing this, however, make sure all TV and component power cords are not plugged into any electrical outlets and your audio and video equipment is turned off. Make sure you leave enough slack so you can install the mount without any interference.
Mounting the TV Before you begin this step, be sure to tighten the Tilt Screw on the Wall Mount (WM) completely using a Phillips-head screwdriver. Make sure that the tilting component is straight. This step makes your mount stable and easy to assemble. When you’re ready to put the Monitor Plate (MP) onto the wall mount, get a friend or an assistant to help you lift the TV and guide the monitor plate onto the wall mount, as shown in Figure 13.
After you’re confident it is properly installed and the TV is securely mounted to the wall, you need to tighten the Security Screws (X or W) using a Phillips-head screwdriver as shown in Figure 13. You really need two people for this part of the task: one person can hold the TV steady while the other turns the security screws into the Wall Mount (WM). You may need to align the Monitor Plate (MP) and the wall plate to ensure proper insertion of the security screws.
Limited Lifetime Warranty [Please note: You are responsible to inspect your mount thoroughly for missing or defective parts immediately after opening the box. To receive replacement or missing part(s) under this Warranty, visit our website at www.bello.com or call our Customer Service Department at 1-888-779-7781. Please have the model number, date code, part number(s) and your sales receipt or other proof of purchase available for reference.