manual

MOUNTING THE TV WITH MOUNTING BRACKETS AND UNIVERSAL FLAT PANEL BARS
POSE DU TÉLÉVISEUR AVEC LES SUPPORTS DE FIXATION ET LES BARRES POUR ÉCRAN PLAT UNIVERSELLES
INSTALACIÓN DEL TV CON SOPORTES DE INSTALACIÓN Y BARRAS UNIVERSALES PARA PANTALLA PLANA
ONLY USE UNIVERSAL FLAT PANEL BARS (I) WITH THE MOUNTING BRACKETS (R OR S) FOR TELEVISIONS WITH A MOUNTING CONFIGURATION
TALLER THAN 300mm. DO NOT EXCEED 125 LBS.
UTILISER LES BARRES POUR ÉCRAN PLAT UNIVERSELLES (I) AVEC LES SUPPORTS DE FIXATION (R OU S) UNIQUEMENT SUR LES TÉLÉVISEURS À
C
ONFIGURATION DE PLUS DE 300 MM DE HAUT. NE PAS DÉPASSER 57 KG.
UTILICE ÚNICAMENTE BARRAS UNIVERSALES PARA PANTALLA PLANA (I) CON LOS SOPORTES DE INSTALACIÓN (R O S) PARA TELEVISORES CON UNA
CONFIGURACIÓN DE INSTALACIÓN DE UNA ALTURA SUPERIOR A LOS 300 MM. NO EXCEDA LAS 125 LB.
1. ATTACH four Large Pads (8) to the FRONT sides of each Universal Flat
Panel Bar (I) where indicated in Fig. 2-1. The Pads will help to
protect your TV cabinet.
NOTE: The FRONT side of the Universal Flat Panel Bar does NOT have
the protruding screw.
2.
CONNECT the Universal Flat Panel Bars (I) to the pair of Mounting
Brackets (R or S) that best fits your size television as shown in Fig. 2-2.
Use two 18mm screws (6) to connect the BOTTOM Mounting Bracket to
the bottom slot of the Universal Flat Panel Bars. DO NOT YET FULLY
TIGHTEN the four Thumb Wheel Nuts (7).
1.
FIXER quatre grands tampons d'appui (8) sur la face AVANT de chaque
barre universelle (I) comme indiqué sur la Fig. 2-1. Les
tampons servent à protéger le boîtier du téléviseur.
REMARQUE : La face AVANT des barres pour écran plat universelles ne
comporte PAS la vis en saillie.
2.
RACCORDER les barres pour écran plat universelles (I) à la paire de
supports de fixation (R ou S) qui convient le mieux pour la taille du
téléviseur comme sur la Fig. 2-1. Avec deux vis de 18 mm (6), raccorder
le support de fixation INFÉRIEUR au trou oblong inférieur des barres
pour écran plat universelles. NE PAS ENCORE SERRER
COMPLÈTEMENT les quatre écrous à molette (7).
1.
COLOQUE cuatro almohadillas grandes (8) a los costados
FRONTALES de cada barra universal para pantalla plana (I) donde
indica la Fig. 1. Las almohadillas ayudarán a proteger el gabinete
de su TV.
NOTA: La parte FRONTAL de la barra universal para pantalla plana
NO tiene el tornillo sobresaliente.
2.
CONECTE las barras universales de pantalla plana (I) al par de
soportes de instalación (R o S) que mejor se adapten al tamaño de
su televisor, tal como se indica en la Fig. 2-2. Utilice dos tornillos de
18 mm (6) para conectar el soporte de instalación INFERIOR a la
ranura inferior de las barras universales de pantalla plana. AÚN NO
AJUSTE COMPLETAMENTE las cuatro tuercas de ajuste con el
pulgar (7).
Fig. 2-1
Fig. 2-2