Bell System (Telephones) Ltd.
TABLE OF CONTENTS INTRODUCTION ........................................................................................................ 1 DESCRIPTION ............................................................................................................ 1 MAIN FEATURES ........................................................................................................ 1 DIAGRAM 1: BELLISSIMO VIDEOPHONE ..........................................................................
View Activated by User ...................................................................................... 13 ‘Global View’ at Multiple Entrances.................................................................... 13 BSD1 DOOR CONTROLLER JUMPER SETTINGS .......................................................... 14 BS VIDEOPHONE SWITCH SETTINGS .................................................................. 15 Mute Time Setting SW1 (1-4) .................................................................
bellissimo 1 Way Video Entry System Introduction Description A bellissimo video door entry system consists of a door panel, positioned at the entrance of a building, a video telephone (videophone), placed inside of the building for the convenience of the occupant and a power supply and controller which are usually located inside an electrical cupboard. The door panel comprises of a twoway speech unit, a camera and a push button – which must be depressed by a visitor to initiate a call.
bellissimo 1 Way Video Entry System Diagram 1: bellissimo Videophone View Mute Lock Contrast Button View / Camera select Mute on/off Lock Lamp Amber Red Green Steady Call in progress Videophone is muted Door is open Installation and Operating Manual Brightness Flashing There is a call Videophone is Off-Hook Press to release lock Page 2 of 25
bellissimo 1 Way Video Entry System Basic System Operation Call sequence When the push button is pressed at the entrance panel it causes the videophone to ring and the amber call lamp to flash. The videophone will continue to ring for up to 30 seconds or until the resident responds by picking up the handset. At this time the resident can freely converse with the visitor whose image is now displayed on the videophone; at the same time the green door lamp will flash to highlight the lock button.
bellissimo 1 Way Video Entry System Call Privacy Once a call has been answered by one videophone no other videophones may join in, view or listen to the call. If another videophones handset is picked up the videophone will not activate; pressing the view button on another videophone will be ignored. User Activation (CCTV Mode) While the system is idle, pressing the view button will activate the system and display the picture at the entrance panel.
bellissimo 1 Way Video Entry System DDA Functionality A range of options exists for entrance panels, which meet the requirements of the Disability Discrimination Act (DDA) including Braille buttons and LED indicators. Contact your sales representative for further details. Multiple Entrances The bellissimo One-way System allows multiple entrances to be catered for by the addition of one door controller and one entrance panel for each entrance and in some instances additional power supplies.
bellissimo 1 Way Video Entry System Design Considerations Equipment List A BS1 one-way bellissimo Video Kit comprises the following: Model No 1 x BS 1 x BSP1 1 x BSD1 1 x PS4 1 x 203 Description Videophone Standard or panel with a model 61 speech unit and Cam BV. Door controller. 4A 12V power supply.
bellissimo 1 Way Video Entry System Power Supply Requirements The system is powered by 12V PSU’s only: PS4 12V, 4A 340C 12V, 1.5A Optional for extensions Note 1. The 28V refered to on the videophone, door controller and wiring diagrams is internally generated in the controller. DO NOT use any PSU other than 12V or damage may occur. Note 2. The PS4 power Supply has been specifically designed to operate with the high-surge requirements of the system.
bellissimo 1 Way Video Entry System CAT5 cable CAT5 is our short reference for EIA standard UTP Category 5 Unshielded Twisted Pair data cable. This is a standard solid core twisted pair cable having 4 pairs (8– cores) and no shield. The cores are in pairs where Blue and ‘Blue with a White stripe’ are twisted together as the first pair. The other three pairs are similar with main colours Orange, Green and Brown.
bellissimo 1 Way Video Entry System Installation & Commissioning The following checklist is a reminder of what is required. Refer to the relevant pages for further details. ● ● ● ● ● ● Review the section headed ‘Important Safety Information’. Ensure that ‘Design Considerations’ have been studied and understood. Confirm that CAT5 cable has been specified. Install the system according to instructions in this section. Check/set the Door Controller Dipswitch and Jumper settings.
bellissimo 1 Way Video Entry System Wiring Refer to Diagram B for single entrance systems and Diagram D for multi-entrances. All wiring is carried out using a mixture of CAT5 for the signal wiring and 1mm² (or greater) cores for the power wiring; refer to Page 8 for further details. It is strongly recommended that a consistent colour code be used throughout such as that indicated on the connection diagram. Certain signals must be interconnected using a twisted pair from the CAT5 cable.
bellissimo 1 Way Video Entry System BSD1 Door Controller Settings BSD1 Door Controller Switch Settings Talking Time/Videophone Active DIP SW1 (1-4) Talk Time 15s 20s 30s 45s 60s 75s 90s 120s 150s 180s 60s 60s* SW1 SW2 SW3 (ASDFGHJK) (ASDFGHJK) (QWERGHJK) 4 3 2 1 On On On On On On On Off On On Off On On On Off Off On Off On On On Off On Off On Off Off On On Off Off Off Off On On On Off On On Off Other settings Off Off Off Off OFF ↔ ON * Default setting Ringing Time/Call Time and Ring Effect DIP SW1 (5-
bellissimo 1 Way Video Entry System Lock Operate Time Dip SW2 (1-3) 2 On On Off Off On On Off Off 1 On Off On Off On Off On Off Lock Time 3s* 4s 5s 6s 8s 10s 15s 20s SW1 SW2 SW3 (ASDFGHJK) (123FGHJK) (ASDFGHJK) 3 On On On On Off Off Off Off OFF ↔ ON * Default setting Individual Functions DIP SW2 (4-8) SW1 SW2 SW3 (ASDFGHJK) (ASDRTYUI) (ASDFGHJK) OFF ↔ ON SW2-4 Lock Type *Off Fail secure lock Lock behaviour during power failure Requires alternate mechanical means, key or thumb-turn to open on power
bellissimo 1 Way Video Entry System Camera Numbering DIP SW3 (1-8) SW1 SW2 SW3 (QWERTYUI) (ASDFGHJK) (ASDFGHJK) Camera 1 at this door Last Camera 4 3 2 1 Number 8 7 6 5 Number On On On On 1 On On On On 1 On On On Off 2 On On On Off 2 On On Off On 3 agama On On Off On 3 On On Off Off 4 On On Off Off 4 On Off On On 5 On Off On On 5 On Off On Off 6 On Off On Off 6 On Off Off On 7 On Off Off On 7 On Off Off Off 8 On Off Off Off 8 Off On On On 9 Off On On On 9 Off On On Off 10 Off On On Off 10 Off On Off On 1
bellissimo 1 Way Video Entry System Example 1: Entrance Cameras at number this entrance 1 2 2 1 3 2 Example 2: Entrance Cameras at this entrance 1 1 2 2 First Camera DIP SW3 (1-4) 1 3 4 Last Camera DIP SW3 (5-8) 5 5 5 First Camera DIP SW3 (1-4) 1 2 Last Camera DIP SW3 (5-8) 3 3 Customer’s setup: Entrance Cameras at First Camera Last Camera this entrance DIP SW3 (1-4) DIP SW3 (5-8) 1 2 3 4 5 6 7 8 9 10 11 12 BSD1 Door Controller Jumper Settings The “Video Gain” jumper on door controllers should always
bellissimo 1 Way Video Entry System BS Videophone Switch Settings Mute Time Setting SW1 (1-4) 3 On On On On Off Off Off Off On On On On Off Off Off Off 2 On On Off Off On On Off Off On On Off Off On On Off Off 1 On Off On Off On Off On Off On Off On Off On Off On Off Mute Time Disabled¹ 2 minutes 5 minutes 10 minutes 15 minutes 20 minutes 30 minutes 45 minutes 1 hour 2 hours 4 hours 5 hours 6 hours 8 hours 10 hours *Indefinite² SW1 (QWEFGHJK) 4 On On On On On On On On Off Off Off Off Off Off Off Off
bell issim o 1 W ay V ideo Entry S ystem Diagram A – 1 Way Basic System Overview Cabling All cable MUST be bellissimo Cat 5 4 pair data cable. Except for power wiring where stated. 75m Max (1 phone) Cat 5 (For over 75m or extension phones see diagrams E&F) 2m Max BSD1 1 way Door Controller Cat 5 2 x 1mm² 50m Max Cat 5 (Options) Lock wiring options Lock 0.5A 1.
bell issim o 1 W a y V ideo En try S ystem Diagram B – 1 Way Basic System Wiring Detail BS Bellissimo Video Phone 28V Data Audio Video + - A B 1 2 + - + - M S Camera 1 + - M S Camera 2 Camera Inputs - + 2 1 B A - - + 2 1 B A Video Audio Data Commn Video Audio Data Cat 5 Input Cat 5 Output Control Equipment Area - + 28V Monitor Power 230V Mains + BSD1 Door Controller (1 Way) PS4 Power Supply 12V + CO NO Door Panel Speech Unit Panel Misc.
bell issim o 1 W ay V ideo E ntry S ystem Diagram C – 1 Way Multiple Entrance Overview Cabling All cable MUST be bellissimo Cat 5 4 pair data cable. Except for power wiring where stated.
Diagram D – 1 Way Multiple Entrance Wiring Detail bell issim o 1 W ay V ideo E ntry S ystem Installation and operating manual Lock wiring options Lock 0.5A 1.0A 12m 1 pair 1 pair 25m 1 pair 2 pair 50m 2 pair 4 pair 50m 2x1mm² 2x1mm² Except for power wiring where stated. 4 pair data cable.
bell issim o 1 W ay V ideo E ntry S ystem Diagram E –Videophone and Extension Wiring The 75m Cat 5 limit is only for a single phone powered by a controller For longer runs or extension phones additional power cores will normally be required Master bellissimo 1 Cat 5 Plus Power Cores Extension bellissimo Extension Extension bellissimo bellissimo Phones MUST be "daisy chain" wired. Only one phone must select "auto display".
bell issim o 1 W ay V ideo E ntry S ystem Diagram F – Videophone Local Power Wiring Where more than one extension phone is required to provide "auto display" then additional power supplies will be required Master bellissimo Extension Extension Extension bellissimo bellissimo bellissimo PSU 340C 12V PSU 340C 12V PSU 340C 12V 1 Cat 5 Installation and operating manual Page 21 of 26
bellissimo 1 Way Video Entry System Troubleshooting Power Problems Videophone resetting (All three indicators lights come on at once and then go off). 28V LED does not light on controller. PS4 output voltage fluctuating, meter reading unstable. Video Problems Blank picture when: Calling videophone/ Pressing view No picture when calling videophone No picture when pressing view Repeated pressing of view does not select cameras in sequence as expected. Power supply intermittent short or overload.
bellissimo 1 Way Video Entry System Call Problems Videophone does not ring or flash when called · · · · · No extension videophone rings or flashes when called Videophone off hook or muted on full mute. No power to videophone; check that red lamp flashes when handset is picked up. Data wiring has a fault, Data A or B broken. 0V to controller missing on separately powered videophone. Master videophone off hook or muted on full mute.
bellissimo 1 Way Video Entry System Specifications BS Videophone Size Fixing Supply Voltage Current Consumption Buzzer Mute Time PS4 Power Supply Size Output Voltage (regulated) Output Current Mains Supply Internal Fuse Supply Voltage Temperature Range Model 61 Speech Unit Size Supply Voltage Current consumption Model CAMBS Camera Size Supply Voltage 210mm x 260mm x 60mm Wall Mounted 13.5V minimum – local power supply only. 20V to 28V typical 750mA @ 13.
bellissimo 1 Way Video Entry System Important Safety Information Connections to the 240VAC mains supply must be carried out by a qualified electrician or similar competent person, and made in accordance with current legislative requirements. A two-pole switch (as provided by a Consumer Unit or Switch-Fuse) must be included to isolate both Live and Neutral during Installation or Maintenance.