Owner`s manual
2 Change Time and Day
3 Playback Memo Message
4 Record Memo Message
5 Record OGM Message
6 Set Answer Mode to ON
7 Playback Message (ICM or Two-Way Recording)
8 Playback OGM
9 Voice Help Menu
* Stop Function
# Set Answer Mode to OFF
During playback, you can press the following keys:
7 Playback Previous Message
8 Repeat a Message
9 Skip Forward to the Next Message
0 Erase a Message
* Stop Function
B. STOP FUNCTION
Press * to abort the current function.
C. CHANGING THE PASSWORD
1.
Press the
1
key. The unit will prompt “(current code). Enter new password.”
2. After a long beep, enter your new 2-digits password, and the unit will announce “(new
code). ”
D. SETTING THE DAY AND TIME
1. Press the 2 key. The unit will announce the current day and time. The unit will prompt
“Enter new day.”
2. After a long beep, enter the new day (Sunday = 1, Monday = 2, Tuesday = 3, etc.). The
unit will then prompt “Enter new time.”
3. After hearing a long beep, enter the new hour(01-12).
4. After two beeps, enter the new minute (00-59).
5. After two beeps, press 1 for AM, or press 2 for PM. The unit will announce the new day
and time, followed by a beep. The unit will prompt, “Please enter next command.”
E. SETTING ANSWER MODE TO ON
1. Press the 6 key.
2. The unit will announce, “Answering machine is ON.”
F. SETTING ANSWER MODE TO OFF
1.
Press the
#
key
.
2. The unit will announce “Answering machine is OFF.”
G. OGM RECORDING
1. Press the 5 key. The unit will prompt “Please record your announcement after the
beep. To stop, press star (*).”
2. After hearing a long beep, begin your announcement. The maximum recording time is
30 seconds.
3. Press star (*) to stop recording and the Excursion
®
.36248 will automatically playback
once for your review.
H. OGM PLAYBACK
1. Press the 8 key and the Excursion
®
.36248 will playback the OGM recorded. If there is
no OGM, the Excursion
®
.36248 will announce “Please enter next command”.
I. RECORDING A MEMO
1. Press the 4 key and the Excursion
®
.36248 will prompt, “Please record your message
after the beep. To stop press star (*).”
2. After hearing a long beep, begin your recording. The maximum recording time is 2