Specifications

20
Page 4
Parameters shown:
Output level: Amplifier output in „dB“ (True RMS) numeric plus bargraph
for each output channel CH.A and CH.B
The scale of the bargraph is set to 2dB/div, = 1dB per segment.
Maximum power output at 0dB.
Page 5
Parameters shown:
Output voltage: output voltage „V“ (True RMS) for CH.A and CH.B in
steps of 0.25V.
Output current: output current in „A“ (True RMS) for CH.A and CH.B in
steps of 0.125A.
Page 6
Parameters shown:
Sine Wave Test: Status: ON / OFF
Power Control: Status: ON / OFF
TXD: Status: Symbol for sending data via RS485
RXD: Status: Symbol for receiving data via RS485