Manualshelf

Installation Guide

ManualsBrandsBella CORE ManualsBathroomAM Up to 48-inD48-inW48-inD Poly 3-Wall Shower and Tub Surround with Gray Design Strip and Gray Trim and Accessories
11121314151617181920
18
Make sure that the DS & panels are flush on the same plane by adding more adhesive to one or
the other.
Vertical Kits-
Dry fit Back Panel aligning top of panel to line on the wall for bottom of Design Strip.
Prior to installing the back panel, place a bead of silicone inside the channels of the internal
trims. Use 100% Bella CORE Fast adheisve circles on the backside of the panels about 4” in
between each one (pic. 4.4). These circles will provide suction when pressed firmly to the wall.
Leave 1 ½” from any side or top that will have a trim piece applied later to it, as this will allow
the backside of the trim piece to slide behind the panel with no blockage.