Manualshelf

Installation Guide

ManualsBrandsBella CORE ManualsBathroomAM Up to 48-inD48-inW48-inD Poly 3-Wall Shower and Tub Surround with Gray Design Strip and Gray Trim and Accessories
11121314151617181920
20
o Install panel & use the spacer bars to hold the panels tight until the fast adhesive tacks
up (pic. 4.7)
Pic. 4.7
Seaming Panels (Tongue & Groove)-
With the tongue & groove panels the seam will almost disappear if installed properly. Install the groove
panel first, place tape on the edge (pic. 4.8) and apply the color matched silicone inside the groove (pic.
4.9). Apply tape to the edge of both panels as well as a small bead of the color matched silicone on the
tongue and then the 100% Bella CORE fast adhesive circles on the back of the panel.
Pic. 4.8 Pic. 4.9 Pic. 4.10
Then at a 45-degree angle insert the tongue into the groove (pic. 4.10). Then press the panel to the wall
and pull the seam tight. If this panel is not trapped inside 2 walls you can take a piece of wood and tap
on the edge to make the seam as tight as possible.
Remove the tape from each side and wipe off any excess colored silicone.