Manualshelf

Installation Guide

ManualsBrandsBella CORE ManualsBathroomBS Up to 48-inD48-inW48-inD Poly 3-Wall Shower and Tub Surround with Beige Trim and Accessories
11121314151617181920
14
o Install panel and use the spacer bars to hold the panels tight until the fast adhesive
tacks up (pic. 3.13), don’t over tighten.
Pic. 3.12 Pic. 3.13
Design Strips-
Installing Design Strips
Dry fit the Back Wall Design Strip (DS) to make sure the top of the DS aligns to the top of the line drawn
on the wall and to back corners. Apply Bella CORE fast adhesive to the back of the Design Strip
and into the groove (female) of the panel (pic. 4.1). Install the tongue of Back Wall DS into the groove
of panel
Pic. 4.1
Dry fit the Valve Wall Design Strip (DS) making sure the top of the DS aligns to the top of the line drawn
on the wall and to the lines drawn on the outside edges.
o Apply fast adhesive to the back of the DS and silicone groove of the
back bottom panel
o Install the tongue of DS into the groove of panel (pic. 4.2)