Installation Guide

Privileged and confidential. Do not duplicate or distribute without written permission from Bella CORE
www.bellacore.net
Tools Needed:
• Corner Level
• Measuring Tape
• Drill
• Caulk Gun
• #8 ¾ Inch Stainless Steel Screws
• Bella CORE Fast Adhesive
• Bella CORE Silicone
• Corner Shelf Installation Component
Installation Instructions:
1. Measure and mark the desired height and placement of the Poly Corner
Shelf
2. Use a corner level for proper placement
3. Apply Bella CORE Fast Adhesive to the back of the installation
components prior to placement and fastening
4. Screw installation components approximately ¼” from each end
5. Wipe away access adhesive
6. Apply Bella CORE Fast Adhesive to the top of the installation
components
7. Place Poly Corner Shelf on the installation component and press gently
8. Seal edges with Bella CORE Silicone