Manualshelf

Installation Guide

ManualsBrandsBella CORE ManualsBathroomSilver Travertine Silver Travertine Panel Kit Shower Wall Surround (Common: 48-in x 48-in; Actual: 48-in x 48-in)
12345678910
5
Recommended Installation Process of Tubs & Shower Pans
When installing a shower pan or tub, make sure that the flange is attached to the stub and the backer-
board or drywall is setting ON TOP of the flange (see diagram below).
This will allow the backer-board/drywall to be flush with the bathroom wall and the ½ Bullnose trim will
set flat on the wall.
If the shower pan or tub is installed over the backer-board or drywall (pics 1.1 & 1.2), use the Full
Bullnose trim. Please note, the wall panels will need to be built out with adhesives or furring strips
making sure the pan or tub is flush with the wall.
Pic. 1.1 Pic 1.2