User Manual

15
BEFORE THE FIRST USE
The appliance can be used for nishing the following tasks separately: I. frothing and heating
milk; II. only frothing separately, without heating; III. only heating separately, without frothing.
1. Before using your milk frother, clean all the parts according to the section “CLEANING
AND MAINTENANCE”.
2. Important: do not wash any parts in the dishwasher, and do not immerse the jar in water.
This may permanently damage the product and void the warranty.
3. The appliance is equipped with two accessories of mixing paddle and frothing paddle,
themixing paddle is used for mixing milk during heating to prevent from sticking.
Thefrothing paddle is used for frothing milk during heating or is used for frothing
separately, but no heating. Select desired accessory according to your task.
NOTE: the max capacity of the jar is 450ml.
OPERATION OF YOUR MILK FROTHER
I. FROTHING AND HEATING
1. Place the appliance on a at surface.
2. Select frothing paddle, then open the lid and insert the frothing paddle onto the shaft
onthe bottom of jar.
3. Fill the jar with the desired amount of milk , and replace the lid.
NOTE: the max milk quantity permitted to add is 100ml, to avoid milk overowing after
frothing.
4. Place the jar on the power base and connect the plug into a power outlet, the indicator will
not light up.
5. Press the switch button once, the indicator will ash in red . Then the appliance will start
to work,when the temperature of milk has achieved about 65±10, the heating element will
stop heating and the frothing paddle will stop rotating automatically; the indicator will
goout.
NOTE: During operation, you can stop operating by pressing the switch button once.
90113_BellaPro_Espresso Capsule Maker with Frother_IM_r3.indd 1590113_BellaPro_Espresso Capsule Maker with Frother_IM_r3.indd 15 2020-10-09 3:58 PM2020-10-09 3:58 PM