Installation Guide

Model: 203107-BRIDGE

Tools List (Not included)

Screwdriver

Parts List (Included)

Screw

(12pcs)

Metal Feet

(4pcs)

Flip the vanity with the back side down on a soft surface. Align and fasten the 4 metal legs with screws to the pre-drilled holes on the

bottom of the cabinet legs.

Step 1

NOTE: SINK STYLE, SHAPE, FAUCET HOLES, CUTOUT ON TOP, VANITY MAY VARY FROM THE PICTURE ABOVE.

INSTRUCTIONAL PURPOSE ONLY.

Professional installation is recommended.

www.bellaterra-home.com

INSTALLATION

TIPS:

press down the

pin on this side

& press up the

one on another

side to pull out

the drawer box.

Step 2

Put this bridge cabinet right next to the main cabinet, and check if it stays firm on the floor and good with the main cabinet.