Installation Guide

6A
6A.NOTE: Check that you have the appropriate drain for your
sink. * If you are installing this pop-up in a sink that has an
electronic faucet,please use plastic tailpiece.
6B
6B.Insert body into sink. If you wish to use silicone as a seal,
remove the top gasket and apply silicone to underside of
drain body.Otherwise, leave gasket in place.
6D
6D.Connect assembly to drain.
7
7.Loosen aerator with wrench or coin. Remove aerator(20).
Turn water on for 1 minute to remove any debris.
6C
6C.Apply silicone grease to the inside diameter of the
rubber washer and threads on drain body and assemble.
Install mounting nut and hand tighten to the sink.
Drain plug
Pop-up
Drain body
Top gasket
Rubber washer
Mounting nut
Top gasket
Drain body
Silicone Sealant
Remove the top gasket
Rubber washer
Mounting nut
Drain
Hot
Cold
20
3
Pop-up Drain Installation