User manual

27
Step 3
PROG
Central unit SCU
Any error during programming is signaled with [ ]. The procedure must be repeated from Step 2.
BEEEEP
Press PROG. The red LED turns off.
6.4.2 Programming the panel address
The panel is already programmed with address 1, which is mandatory for the correct
functioning of the system. The programming is necessary only if the address 1 is changed by
mistake during installation.
Step 1
Central unit SCU
PROG
Outdoor panel
VPT
Step 2
Long press of PROG. The red LED turns on.
BEEEEP
Long press of [ ]. The panel goes in programming.
BEEP
- For panel address 1 - 1 short touch of 1 x [ ] Step 3.
Name 1
6.5. Use of the video terminal (VTT)
The factory standard settings are the following:
Ringtone
Ringing duration
Ringing volume
Ding-dong (first in the list)
2 calls
Level 7 from 7
Access granting
(ringing duration setting)
Call answering
+ Audio-Video Monitoring
(ringtone setting)
Talk volume + mute
(ringing volume setting)
3.5 inches color display
CALL
6.5.1 Functioning
The keyboard is off.
STAND-BY
When called from the outdoor panel, the terminal rings, the
key blinks white and the video image of the visitor is displayed.
The terminal rings with the specific doorbell ringtone.
CALL from the doorbell