User manual

28
Another short touch of .
END TALK without
access
TALK VOLUME
ADJUSTMENT
Terminal during talk
Successive short touches of Increasing the talk volume
BEEP
in 7 levels. The maximum level is signaled with 2 x [ ].
With the next touch, the volume restarts from level 1.
RINGER OFF (MUTE)
Terminal in stand-by or
during call
BEEEEP
For reversing MUTE status, short touch of [ ] and
LED turning white.
Step 2
Step 1
Hands-free conversation, without touching any key. The talk duration
is max. 2 min.
TALK
Short touch of Talk is initiated.ANSWERING THE CALL
BEEEEP
Long press of [ ] and LED turning red.
The terminal has the ringer off and the LED remains red.
The call will be signaled by blinking white and
video image.
ACCESS GRANTING
Terminal in stand-by or
during call, talk or monitoring
Short touch of Video and bidirectional talk for max. 10 sec.
* Each short touch of changes the video camera (in case of additional cameras in the system).
VIDEO & AUDIO
MONITORING
Terminal in stand-by
From stand-by Long press of .
During call, talk or monitoring Short touch of any time.
The access is signaled acoustically also, with a specific confirmation
song and the bidirectional audio communication remains opened
10 more sec.
6.5.2 Settings and adjustments
You can change any standard settings of the terminal by the following procedures:
VIDEO IMAGE
ADJUSTMENT
If the image on the display is not ok, you can adjust in this order:
1.Impedance adjustment; 2.Brightness; 3.Chrominance, available on
the terminal's back.
RINGING VOLUME
ADJUSTMENT
Terminal during call
Successive short touches of .The maximum level is signaled with
BEEP
2 x [ ]. With the next touch, the volume restarts from level 1.
This adjustment won`t be memorized, the set level has priority.