User manual

Setting the programming mode for the Touch Line video door phone system
6
EN
EN
10
IMPORTANT: The programming mode is set from the SCU, by long pressing (2-3 sec.) the PROG. button
You can program:
1) The address of the terminal (apartment number) from 0002 to 9999. Programming can be done manually, according
to the procedure from the user manual for the Touch Line audio-video terminals, or using a special programmer, supplied
by the manufacturer. All terminals are programmed from the factory with Address 1.
2) The address of the 2, 3 or 4 outdoor panels, when a building has multiple entrances. The outdoor panels are
programmed from the factory with Address 1.
3) The storage/deletion/addition of the RFID access TAGs/CARDs.
Exiting programming mode is done by short pressing the PROG. button. The PROG Red LED turns off.
7
Warranty
EN
1. Warranty is granted for hidden defects and/or the equipment not functioning according to the present user manual,
in compliance with the current legislation and based on the purchase documents.
2. No warranty is granted for damages due to mounting performed by unauthorized personnel and by inappropriate use.
The PROG Red LED turns on and remains on during
the entire programming phase.
PROG. button