Manualshelf

User manual

ManualsBrandsBELLCOME ManualsIntercomsVideo door intercom Corded DIN rail power supply unit Black
12345678910
Contents
1
Safety instructions
2
Description of the central supply and command unit (SCU)
4
Description and functions of the power supply unit (PSU)
5
Recommended cables. Installation.
Safety instructions
3
Functions of the central supply and command unit (SCU)
1. ATTENTION! The installation, maintenance and connection of the central supply and command unit (SCU) or of the power supply unit
(PSU) to the 110 V/ 230 V – 50 Hz/ 60 Hz power network is done only by authorized personnel!
2. ATTENTION! It is mandatory to use a 3 x 0,75 cable and 2 automatic fuses (6A) to power the central unit (SCU) or the supply unit
(PSU) from the 110V/230V - 50Hz/60Hz power network.
3. ATTENTION! The S1 safety fuses must be disconnected during the mounting, connection and service to the central unit (SCU) or the
supply unit (PSU).
4. ATTENTION! DO NOT DISMANTLE THE FRONT LID OF THE CENTRAL UNIT (SCU) or of the SUPPLY UNIT (PSU)! RISK OF
ELECTRIC SHOCK! Only the protection cases of the connections can be dismantled during mounting or service.
5. IMPORTANT! The S1 fuses remain disconnected when the L, N, connections are made to the SCU or PSU, and when the L1, N1
connections are made to the S1 fuses. After the connections are made, the protection lids of the connections are mounted.
6. DO NOT TOUCH the metallic parts of the wires or the connection terminals of the central unit (SCU), of the supply unit (PSU) or of the
fuses. First, you have to disconnect the 6A fuses ( ) from the power network and then you can work with the central unit POWER OFF
(SCU) or the supply unit (PSU).
7. ATTENTION! Do not supply components of the installation separately (outdoor panel, terminals etc.) at voltage higher than 14 Vd.c.
or directly from the network (230 V/ 50 Hz or 110 V/ 60 Hz). RISK OF ELECTRIC SHOCK and damage of the installation.
8. PAY ATTENTION at the polarity of the BAT battery terminals (max. 7 Ah/ 12 Vd.c.) when connecting it to the central unit (SCU) or
the supply unit (PSU).
0
EN
1
EN
EN
1
6
Setting the programming mode for the Touch Line video door phone system
7
Warranty