Instructions / Assembly

STEP 10.
Adjustment and installation
12
strike plate
jamb side (handle)
Wrong.
Needs to be adjusted.
Hinge side
Strike plate jamb side (handle)
Check and adjust the hinge side of the jamb
according to the level first.
Fix the hinge side jamb to the wall with the help
of EZ hangers, “A” screws ( 1 5/8”) (not included)
and shims (not included) if needed.
Unscrew the screws of the strike plate
side (handle side) of the jamb.
Align the door slab within door jamb (frame)
minding the gaps between the door slab
and the door jamb.
Hinge side of the jamb is already fixed to the
wall, so the strike plate side of the jamb and
the header jamb need to be adjusted.
Please note, metal EZ Hangers have the ability
to be bent. In some installation cases you
would need to bend them during the door
installation to be as close as possible to the
best installation result.
Fix the strike plate side (handle side) of the
jamb and the header jamb to the wall with the
help of EZ Hangers, “A” screws ( 1 5/8”) (not
included) and shims (not included) if needed.
As long as the door slab
does not touch the floor
or any side of the jamb
Small deviations
are acceptable.