Instructions / Assembly

hts reserved.
1.
2.
3.
1.
2.
3.
CAUTION
1.
2.
Contact Belle Forêt at [phone]. Copyright ©2015, World Imports Decorave Plumbing. All rights reserved.
PAGE 3
INSTALLATION INSTRUCTIONS
JORDHEIM 49 IN. VANITY COMBO
Two people are needed to safely li the top and accurately posion
it onto the vanity.
3: SEALING THE BASIN
Apply a bead of silicone sealant where the basins (D) meet the top (B).
Use a clean rag to push in the silicone and wipe away any excess.
1: ADHERING THE BASIN
Apply a layer of silicone on the underside of the top (B) along the basin
cutout, where the basin (D) will be in contact.
Lower each basin (D) onto the top (B), lining it up with the cutout.
Wipe away any excess silicone.
Do not over ghten the screws as this could crack the basin.
Posion the brackets (E) so they clamp the basin (D) edge to the top (B).
Thread the screws (F) through the spaces in the brackets (E), then
through the anchor in the top (B).
Tighten the screws with a screwdriver, turning it clockwise.
2: SECURING THE BASIN
1.
2.
3.
4.
Wipe off the top edges of the vanity (A) that will be in contact with the
top using a clean rag.
Apply a layer of silicone along all of the top edges.
Align the top (B) with the vanity (A).
Slowly lower the top (B) onto the vanity (A).
CAUTION
4: ATTACHING THE TOP
A
B
D
E
F
D
B
B
D
B