Installation Guide

R218

WESTBRASS • 2429 E. Olympic Blvd., Los Angeles, CA 90021

(213)-627-8441 • (213) 627-2844 • orders@westbrass.com • www.westbrass.com

INSTRUCTIONS:

1. Thoroughly clean around opening in sink.

2. Apply silicone around drain opening, approximately 1/2”

from edge of opening.

3. Remove nuts and washers and place bar strainer body

through opening.

4. From the underside of the sink place rubber washer over

large threads. Then screw large metal nut tightly against the

washers.

5. Complete the installation by further tightening large nut

with nut wrench.

6. Remove excess silicone with soft cloth.

INSTRUCCIONES:

1. Limpiar bien alrededor de la abertura del lavabo.

2. Aplicar silicona alrededor de la abertura del desagüe, aproximadamente a 1/2” del borde.

3. Retire tuercas y arandelas y colocar el cuerpo del cladero en la abertura.

4. Desde abajo del lavabo pasar la arandela de goma la rosca grande. Enroscar y ajustar

5. Por último ajustar la arandela grande con una llave inglesa.

6. Limpiar el exceso de pasta con un paño.

D218 Installation Instructions

PAGE 1
D218 R218 Installation Instructions INSTRUCTIONS: 1. Thoroughly clean around opening in sink. 2. Apply silicone around drain opening, approximately 1/2” from edge of opening. 3. Remove nuts and washers and place bar strainer body through opening. 4. From the underside of the sink place rubber washer over large threads. Then screw large metal nut tightly against the washers. 5. Complete the installation by further tightening large nut with nut wrench. 6. Remove excess silicone with soft cloth.