BELLE 870/60000/1 09/18 PWX RANGE GB • Spare Parts Book Operators Manual 14 1 4
EC DECLARATION OF CONFORMITY / DECLARATION CE DE CONFORMITE / DECLARACIÓN DE CONFORMIDAD CE / DECLARAÇÃO CE DE CONFORMIDADE / EG-VERKLARING VAN OVEREENSTEMMING / EF OVERENSSTEMMELSESERKLÆRING GB F E P NL DK We, Belle Group Sheen UK, Sheen, Nr.
EGKONFORMITÄTSERKLÄRUNG / DICHIARAZIONE CE DI CONFORMITÁ / EG-VERKLARING VAN OVEREENSTEMMING / EC SAMSVARSERKLÆRING / EY-YHDENMUKAISUUSILMOITUS / DEKLARACJA ZGODNOSCI Z PRZEPISAMI UE D I S NO SF PL Wir, Belle Group Sheen UK, Sheen, Nr.
GB How To Use This Manual This manual has been written to help you operate and service the Pressure Washer safely. This manual is intended for dealers and operators of the Pressure Washer. Foreword The ‘Environment’ section gives instructions on how to handle the recycling of discarded apparatus in an environmentally friendly way. The ‘Machine Description’ section helps you to familiarise yourself with the machine’s layout and controls.
GB Machine Description 7KURWWOH /HYHU 3HWURO YHUVLRQ VKRZQ &KRNH /HYHU )XHO 21 2)) /HYHU 4. Engine ON / OFF Switch. 5. Air Filter Housing. )XHO 7DQN 7. Exhaust. 15 25 5HFRLO 6WDUWHU +DQGOH 3XPS ,QOHW )LOWHU 3XPS ,QOHW 4XLFN 5HOHDVH &RXSOLQJ +LJK 3UHVVXUH 2XWOHW 1RQ +RVH 5HHO YHUVLRQV RQO\ 14 16 7 3XPS 2LO /HYHO 6LJKW *ODVV +DQGOH /DWFK 5 8 17 22 18 19 6 1 20 4 2 11 21 3 9 23 10 24 27 21 13 12 /D
GB Technical Data 1462 1155 1087 780 513 615 925 630 740 Model Weight (Kg) 460 PWX 08/180 PWX 13/230 PWX 15/250 57 PWX 15/250D +RQGD *; +RQGD *; +RQGD *;
Decals A. Altrad Logo Decals. % 0RGHO ,GHQWL¿FDWLRQ 'HFDOV C. Information Decal. GB F D. Safety Decal. E. High Pressure Outlet Decal F. Lifting Point Decal A B D C A E B A. Altrad Logo Decal. % 0RGHO ,GHQWL¿FDWLRQ 'HFDO ,GHQWL¿HV WKH PRGHO RI 3UHVVXUH :DVKHU C. Information Decal LQFOXGHV LQIRUPDWLRQ RQ WKH PRGHO QDPH QRLVH OHYHO LQ G% $ DQG VDIHW\ V\PEROV ZKLFK DUH LGHQWL¿HG EHORZ Please Read Operators Manual Wear Protective Footwear Wear Ear Protection D.
GB General Safety For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely. If you are unsure about the safe and correct use of the Pressure Washer, consult your supervisor or Altrad Belle. BEFORE STARTING THE PRESSURE WASHER CAUTION Improper maintenance or use can be hazardous.
Start and Stop Procedure STOPPING - HONDA GX200, GX240 & GX390 • Switch OFF the loads. • Switch OFF the engine. • Turn the fuel tap to the CLOSED position. Throttle Lever STARTING - HONDA GX200, GX240 & GX390 • Remove all objects placed on, or within one metre of the Pressure Washer. • • • • • • • • • • • GB Choke Lever Open the fuel tap by moving the fuel ON / OFF lever fully to the right. Fuel ON/OFF If starting the engine from cold, set the choke ON by moving the choke lever Lever.
Operating Instructions GB WARNING Before you operate or carry out any maintenance on this machine YOU MUST READ and STUDY this manual. PRE-OPERATION • Check your Pressure Washer before use and IMMEDIATELY replace any damaged parts. 3ODFH WKH 3UHVVXUH :DVKHU RQ ¿UP OHYHO JURXQG ZLWK WKH HQJLQH VZLWFKHG OFF. • Check the engine oil level, low oil levels will result in the engine not starting. • Check the fuel level.
Service and Maintenance GB The following schedule details the attentions considered necessary to ensure satisfactory operation of the Pressure Washer. NOTE:- The attentions and periods summarised in the schedule are the initial recommendations and should be revised to suit the Power Unit working conditions.
GB Replacement Parts Contact your nearest Altrad Belle dealer. When ordering replacement parts, please quote the product type, serial number & engine/motor model. Detail the part required in conjunction with the parts list provided, indicating the Page Number, Item Number and quantity required. GB Warranty
1-01 7 14 5 6 13 10 8 9 5 14 1 4 3 5 7 12 2 Chassis Assembly - PWX 08/180 1 2 3 4 5 6 7 8 9 10 11 12 13 18 02500 .................. Chassis ................................................................... 1 00525-B .............. Foot......................................................................... 2 4/1003 ................. Washer ..................................M10 ......................... 2 8/10003 ............... Nut .........................................M10 .................
