BELLE 870/20008/4 07/18 ROLLER STRIKER GB • Spare Parts Book Operators Manual 10 1 4
EC DECLARATION OF CONFORMITY / DECLARATION CE DE CONFORMITE / DECLARACIÓN DE CONFORMIDAD CE / DECLARAÇÃO CE DE CONFORMIDADE / EG-VERKLARING VAN OVEREENSTEMMING / EF OVERENSSTEMMELSESERKLÆRING GB F E P We, Belle Group Sheen UK, Sheen, Nr.
СЕРТИФИКАТ СООТВЕТСТВИЯ / EÜ VASTAVUSDEKLARATSIOON / ATBILSTĪBAS DEKLARĀCIJA / ES ATITIKTIES DEKLARACIJA / ΕΕ ΔΗΛΩΣΗ ΚΑΤΑΛΛΗΛΟΤΗΤΑΣ RUS EST LV LT BG GR Мы, нижеподписавшиеся, от имени Belle Group Sheen (Великобритания), Sheen, Nr.
How To Use This Manual GB This manual has been written to help you operate and service the ‘Roller Striker’ safely. This manual is intended for dealers and operators of the ‘Roller Striker’ . Foreword The ‘Machine Description’ section helps you to familiarise yourself with the machine’s layout and controls. The ‘Environment’ section gives instructions on how to handle the recycling of discarded apparatus in an environmentally friendly way.
Machine Description GB 3 10 7 4 2 8 1 5 9 6 Pneumatic Option Hydraulic Option 1. 2. 3. 4. 5. 6. Motor 7. Control Lever 8. Couplings 9. Drive Connector 10. Operating Handle Motor Compressor Claw Operating Handle Control Lever Drive Connector Technical Data Model GB Roller Striker Sectional Roller Striker 3.66 - 7.92 2.2 - 7.2 Tube Length (M) Machine Weight - Hydraulic (kg) 24 Machine Weight - Pneumatic (kg) 29 Motor Power - Hydraulic (hp) 3 Motor Power - Pneumatic (hp) 2.2 Max.
General Safety GB For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely. If you are unsure about the safe and correct use of the ‘Roller Striker’, consult your supervisor or Altrad Belle. CAUTION • • • • • • Improper maintenance can be hazardous.
Operating Instructions CAUTION GB Improper operation can be hazardous. Ensure that you are familiar with the operation of the Compressor and the Roller Striker before use. Start and Stop procedure - Hydraulic Models 1. Refer to the manufacturers Operating Instructions Manual for the start up procedure for Hydraulic Power Packs. 2. Ensure that before starting the Power pack that all connections are tight and that the control valve on the striker is in the NEUTRAL position (See Fig.
Operating Instructions GB CAUTION Always ensure that you are aware of the direction of travel when using the roller striker. If you incorrectly engage the drive mechanism you will not only endager yourself , but also endager the other operator(s) Take the Roller Striker to where it is required. If the Roller Striker is to be transported to another location, ensure that the Striker is not rotating and that the Hydraulic / Pneumatic pipes are disconnected.
Service & Maintenance GB Maintenance The Altrad Belle ‘Roller Strikers’ are designed to give many years of trouble free operation. It is recommended that an approved Altrad Belle dealer carries out all major maintenance and repairs. Always use genuine Altrad Belle replacement parts, the use of spurious parts may void your warranty. Before any maintenance is carried out on the machine, ensure that is has been disconnect from any power source.
