BELLE 870/10014/3 06/17 RTX RAMMERS GB US F E P NL DK D I • Spare Parts Book • Pièces Détachées • Libro Despiece • Lista de Peças • Onderdelen Boekje • Reservedele Skrift • Ersatzteilhandbuch • Manuale dei Ricambi • Bruksanvisning • Varaosaluettelo • Lista Części Zamiennych • Запасные Части Книга • Varuosade Nimekiri • Rezerves Daļu Saraksts • Atsarginiu Daliu Sarašas • Част Списък • Část Barevný Pruh • Lista Pieselor De Schimb • Részek Oldalra Dől • Rezervni Djelovi Knjiga 300 S SF PL RUS EST LV LT BG
EC DECLARATION OF CONFORMITY / DECLARATION CE DE CONFORMITE / DECLARACIÓN DE CONFORMIDAD CE / DECLARAÇÃO CE DE CONFORMIDADE / EG-VERKLARING VAN OVEREENSTEMMING / EF OVERENSSTEMMELSESERKLÆRING GB F E P NL DK We, Belle Group Sheen UK, Sheen, Nr.
EGKONFORMITÄTSERKLÄRUNG / DICHIARAZIONE CE DI CONFORMITÁ / EG-VERKLARING VAN OVEREENSTEMMING / EC SAMSVARSERKLÆRING / EY-YHDENMUKAISUUSILMOITUS / DEKLARACJA ZGODNOSCI Z PRZEPISAMI UE D I S NO SF PL Wir, Belle Group Sheen UK, Sheen, Nr.
ɋȿɊɌɂɎɂɄȺɌ ɋɈɈɌȼȿɌɋɌȼɂə / EÜ VASTAVUSDEKLARATSIOON / ATBILSTĪBAS DEKLARĀCIJA / ES ATITIKTIES DEKLARACIJA / £©² ¤¢ ¤ ² ǻǻ ǺǽȀȌȇǽ ǿǸȈǸȀȀǽȀȄȈǽȈǸȇ RUS EST LV LT BG GR Ɇɵ ɧɢɠɟɩɨɞɩɢɫɚɜɲɢɟɫɹ ɨɬ ɢɦɟɧɢ %HOOH *URXS 6KHHQ ȼɟɥɢɤɨɛɪɢɬɚɧɢɹ 6KHHQ 1U %X[WRQ 'HUE\VKLUH 6.
(6 352+/Çá(1Ê 2 6+2'Ċ '(&/$5$7,( '( &21)250,7$7( &( (8 0(*)(/(/Ė6e*, 1<,/$7.2=$7 (& 8<80 %÷/'÷5*(6÷ (& ,=-$9$ 2 86./$ć(1267, 35(+/Ç6(1,( 2 =+2'( CZ RO HUN HR TR SK My, Belle Group Sheen UK, Sheen, Nr.
GB How To Use This Manual This manual has been written to help you operate and service the RTX Rammer safely. This manual is intended for dealers and operators of the RTX Rammer. Foreword The ‘Machine Description’ section helps you to familiarise yourself with the machine’s layout and controls. The ‘Environment’ section gives instructions on how to handle the recycling of discarded apparatus in an environmentally friendly way.
GB Machine Description 1 5 2 8 11 16 14 12 17 3 2 6 12 4 7 13 9 RTX 80D 15 10 RTX 60 / 68 / 70 RTX 50 / 66 / 74 1. Fuel Tank. 7. Bellows 13. Lifting Handle 2. Throttle Lever. 8. Lifting Eye. 14. Secondary Air Cleaner (Dual) 3. Fuel ON / OFF Lever. 9. Leg Oil Plug. 15. Leg Oil Sight Glass 4. Engine. 10. Ramming Shoe. 16. Transport Roller (Optional) 5. Stop Button. 11. Operating Handle. 17. Decompression Lever 6. Crankcase. 12.
GB Decals E D B E C C A D M B L N E A K E F P H G J A - Transport Decal (Part No. 800-99631) On-Site Transport The RTX Rammer may be moved vertically by 2 people, laid on the Transport Roller (if ¿tted) and pulled using the Lifting Handle or by using a Sling or Hoist on the Lifting Eye. NOTE:- A sling or hoist must not be used on the Lifting Handle.
GB Decals D - Throttle Decal (Part No. 800-99628) STOP Max. RPM Position Idle Position Emergency Engine Stop Stop Button Position (Petrol Only) E - Branding Decal Branding Decal to identify the Model of RTX Rammer. F - Noise Decal Guaranteed Sound Power Level of the machine in dB(A). G - Spring Safety Decal (Part No. 800-99619) DO NOT loosen or remove any of the Screws from the underside of the Rammer Leg.
GB Decals L - Safety Decal (Part No. 800-99831) WARNING! Please Read Operators Manual Wear Protective Footwear M - Exhaust Fumes Warning Decal (Part No. 800-99520) Engines emit carbon monoxide; operate only in well-ventilated areas. N - Hot Surface Decal (Part No. 800-99520) CAUTION! Beware of hot surfaces around the Engine and Exhaust area. P - Diesel Only Decal (Part No. 800-99524) CAUTION! Only Diesel must be used in this machine (Diesel models only).
GB Technical Data B D E C A Model RTX 50 RTX 60C A - Width (mm) RTX 60 345 B - Length (mm) 670 705 C - Height (mm) 975 975 D - Ramming Shoe Width* (mm) 230 165 RTX 66 RTX 68 RTX 70 425 345 345 700 705 714 1065 1040 1040 Honda GX120 Honda GX100 Engine Type 1081 Honda GX100 Honda GX120 Yanmar L48 Single Cylinder 4 Stroke, OHC, Air Cooled Maximum Output (kW) 2.3 2.6 Fuel Type 2.3 2.6 Unleaded Fuel Tank Capacity (Ltrs) 2.
GB General Safety For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely. If you are unsure about the safe and correct use of your RTX, consult your supervisor or Altrad Belle of companies. CAUTION • • • • • • • • • • • • • This machine must only be used for its intended purpose.
Pre-Start Checks GB Pre start-up inspection The following Pre-start-up inspection must be performed before the start of each work session or after every four hours of use, whichever is ¿rst. Please refer to the service section for detailed guidance. If any fault is discovered, the RTX must not be used until the fault is recti¿ed. 1. 2. 3. 3.1 3.2 4. Thoroughly inspect the RTX for signs of damage. Check Hoses, ¿ller openings, Drain Plugs and any other areas for signs of leakage.
GB Start & Stop Procedure CAUTION WARNING Improper operation can be hazardous. Read and understand this section before you start the machine. To stop the machine in an emergency, move the Throttle Lever to the Emergency Stop position. This will immediately stop the machine from vibrating. Honda GX100 & GX120 1. Open the fuel cock/tap. 2. Set the speed control lever to the STARTING position (Halfway between HIGH and LOW position). 3. Move the choke lever to the CLOSED position. 4.
GB GB Start & Stop Procedure NOTICE: The optimum maximum engine revolution has been set at the factory as follows: Model Engine RTX 50 Maximum RPM Optimum Upper Limit Honda GX100 3,800 +/- 50 3,850 RTX 60 Honda GX100 3,800 +/- 50 3,850 RTX 66 Honda GX120 3,400 + 0 / - 50 3,400 RTX 68 Honda GX100 3,800 +/- 50 3,850 RTX 70 Honda GX100 4,050 +/- 50 4,100 RTX 74 Honda GX120 3,400 + 0 / - 50 3,400 RTX 80D Yanmar L48 The Max RPM, as shown above is the number of ignitions per minu
GB Trouble Shooting Guide Problem Cause Engine will not start Engine stops suddenly, or stops when the engine rpm is increased. Engine runs, but machine does not produce impact. GB Remedy No fuel Fill Fuel Tank Fuel Tap has been closed Open fuel tap. Engine not primed. (GX100 Only) Push the Carburettor Primer Bulb 4 times and pull the Recoil Handle until the Engine ¿res Engine not primed. (Diesel Only) See the Service & Maintenance section of this Manual. Spark Plug contaminated or damaged.
GB Service & Maintenance Every 8 Hours or Daily 1. Check for loose bolt and nuts, retighten if necessary. 2. Check and clean air ¿lter element, re-lube the element according to the engine manufacturer’s recommendations. If operating conditions are unusually dusty and severe, ¿lter element cleaning should be done more frequently. 3. Check oil level in crankcase of engine and replenish as necessary. Check oil level in the ramming cylinder as per following procedures. 3a.
GB Transport CAUTION Please ensure that you have read and fully understand the information below before attempting to transport the RTX Rammer. On-Site Transport The RTX Rammer may be moved vertically by 2 people, laid on the Transport Roller (if ¿tted) and pulled using the Lifting Handle or by using a Sling or Hoist on the Lifting Eye. NOTE:- A sling or hoist must not be used on the Lifting Handle. Alternatively, use the optional Wheel Kit - see below for details.
GB Spare Parts KEY USE LOCTITE USE OIL LI SI N O C E USE SILICONE For information regarding Spare Parts availability for this machine, please visit www.Belle247.com or contact the ALTRAD Belle using the following contact details:Tel:- +44 (0)1298 84606 Fax:- +44 (0)1298 84073 Email:- sales@ALTRAD-Belle.com Warranty GB Your new Altrad Belle Rammer Tamper is warranted to the original purchaser for a period of one-year (12 months) from the original date of purchase.
