Service manual

USING THE MINUTE MINDER (if fitted)
The digital timer enables you to set the
time of day (24 hour clock) and the minute
minder alarm.
Setting the “Time of Day”
1. Switch on the electricity supply to the
appliance.
The display will flash.
2. Press and release the time of day
button.
3. Set the time of day with the plus and
minus buttons.
4. The time will be set 7 seconds after the
last plus or minus operation.
Alarm tones
After setting the time of day, you can select
one of three alarm tones.
Press the minus button to listen to the first
tone, then release the minus button and
press it again to listen to the second tone,
etc.
Releasing the minus button after a tone
has sounded will automatically select that
tone.
Setting the minute minder
1. Press and release the plus button to
change the display from clock to minute
minder - the bell symbol will light.
2. Use the plus and minus buttons to set
the length of time before the alarm tone
will sound. The display will increase /
decrease in units of 10 seconds up to 99
minutes 50 seconds, and in units of 1
minute from 1 hour 40 minutes upwards.
The maximum period which may be set is
10 hours.
The display format will change after 99
minutes and 50 seconds to 1 hour and 40
minutes.
During countdown, the minute minder has
priority on the display, which will show (in
minutes : seconds, or hours : minutes) the
time remaining.
When countdown is complete, the tone will
sound for 7 minutes, or it can be reset with
one touch of any button.
To cancel the minute minder at any other
time, run down the set time with the minus
button.
The display will revert to show the time of
day.
%$#$3$.
  
  
&



0

 

 
 