Service manual

INSTALLATION INSTRUCTIONS - GAS PRODUCTS
Ovens - Open the oven door. Turn the
control to the FULL ON position and press
the ignition switch, or hold a lighted match
or taper to the burner. Hold the control
knob in for 15 seconds. Do not hold the
control knob in for longer that 15 seconds.
If the burner fails to light within this time,
release the control knob and wait one
minute before attempting further ignition.
Before leaving the installation
1. Place all the loose parts of the cooker
into position.
2. Show the customer how to operate
the cooker and give them this handbook.
Thank you.