20130304 issue 8 啊哈 60cm Built-In Ceramic Cooktop Installation and User manual Content Safety instructions-----------------------------------2 Features of your product---------------------------4 Installing the appliance-----------------------------4 Start using your appliance-------------------------7 Maintenance and troubleshooting---------------9 Warranty-----------------------------------------------10 For warranty service call 1300 373 199 (Australia) or 0508 123108 (New Zealand) to connect you to t
Safety Instructions This manual explains the proper installation and use of your appliance, please read it carefully before using even if you are familiar with the product. The manual should be kept in a safe place for future reference. In case of failure, all electrical work/repairs must be carried out by a suitable and authorised electrician or service agent, otherwise the guarantee will be null and void.
Safety Instructions Safety When Cleaning with damaged bottoms can scratch the glass z ceramic if pushed across the surface. For cleaning, the appliance must be switched off and cooled down. z z Objects that melt and things that boil over can For safety reasons, the cleaning of the burn onto the ceramic glass and should be appliance with steam jet or high pressure removed straightaway. cleaning equipment is not permitted. z Do not use the cooking zones with empty cookware or without cookware.
Features Of Your Cooktop Technical Data Product Dimensions Model (h x w x d) mm BC604T, BC604T-F 46x590x520 Electrical Max. Power Connection Rating 220-240V a.c 50Hz 6000 W Heating Elements Control Panel 1a 1200 W Ø 140mm 2a 1800 W Ø 180mm 3a 1200 W Ø 140mm 4a 1800 W Ø 180mm Technical Data Product Dimensions Model (h x w x d) mm BDC604OT, 46x590x520 BDC604OT-F Electrical Max. Power Connection Rating 220-240V a.
Installing The Appliance Important: z There must be a minimum distance of 65mm from rear wall of cabinet Preparation z Remove any dust from the benchtop directly surrounding the cut hole to ensure there is a clean surface. z Remove the protective paper film from the adhesive strip that is secured to the bottom of the glass surface. z Position the cooktop into the hole in the benchtop and press down firmly to ensure a secure fit to the benchtop. 2 3 1. Benchtop 2. Ceramic Cooktop 3.
Installing The Appliance Electrical Connection Caution: z The appliance must only be installed and connected by a Licensed Electrician or Service Agent. z If the mains supply where the cooktop is to be installed is different from 220...240V~,make the connection as shown in the enclosed diagrams. (The cable must be able to withstand temperatures of 120°C). z Open terminal board cover at rear panel of appliance and connect as per below diagram for 220V – 240V earthed single phase.
Start Using Your Appliance Control Panel of BC604T and BC604T-F Items Description Cooking zone selectors Explanation By pressing any of the 4 selector keys, the corresponding zone is selected for operation. The respective LED Display for that zone will flash for 6 Seconds on setting 9. Pressing Control Key twice will turn OFF corresponding zone quickly.
Control Panel of BDC604OT and BDC604OT-F Items Description Explanation Power level From lowest level 1 to highest power display level 9. LED light turns ON at left-top of each power level display is telling which zone is under timer setting. Example as left Timer activated illustration is telling cooking zone 2a indication light (Oval dual zone) is under timer setting. Key 1 Cooking zone continuously can let the zone selectors 1 2 3 Circular dual zone 4a.
Timer display It countdown when timer set to tell how many minutes working time left. Power level/ Press key 1 to 4 to choose cooking Timer adjustor zone, then press + or – when display is flashing to choose desired power level. If you want to set up timer, then press Timer key when display is flashing to enter into Timer setting. Cooking zone will start working when flashing stopped.
Start Using Your Appliance Selecting The Correct Pan z Choose a pan with a diameter that is at least as large as the heating zone. z Do not use pans with a concave, convex or a rough base, ensure to select flat bottom pans . z Always remember to put the correct lid on the pan. Warning: z Avoid scraping the glass of the cooktop when you move the pans. Lift them up to move. z Never heat an empty pan.
Maintenance & Troubleshooting Caution: z Spills and splashes will not harden and stick to the glass, as it hardly heats up. z Vitro-ceramic should however be cleaned of any spills or splashes as quickly as possible. z Slight stains can be removed with kitchen paper or cloth. z More resistant stains will need specific product for vitro-ceramic glass. Follow each product’s inductions. Important: z Do not use abrasive products or cleaning powders as these could scratch the cooktop.
WARRANTY 1.1 In this warranty: 1.1.1 Australian Consumer Law means the law as set out in Schedule 2 of the Competition and Consumer Act 2010; 1.1.2 Company means GSM Sales Pty Ltd ABN 53 007 682 475 of 142-144 Fullarton Road, Rose Park SA 5067. Telephone 08 8122 2390. Email admin@gsmsales.com.au 1.1.3 Consumer means a “consumer” as that term is defined in Section 3 of the Australian Consumer Law as the original purchaser of a Bellini product; 1.1.
1.8 You must provide proof of your purchase of the Bellini product and the date of purchase in order to obtain the benefit of this warranty. 1.9 If you live outside the service area of the Company or one of its service agents, this warranty does not cover the cost of transport of the Bellini product for service nor the service agent’s travelling costs to and from your home. 1.