20130306 issue8 60cm Built In Oven Installation and User manual Content Important Safety instructions-------------------- 2 Product description--------------------------------- 4 Installation-------------------------------------------- 7 Start using your oven------------------------------- 9 Maintenance and cleaning------------------------ 14 Warranty----------------------------------------------- 16 For warranty service call 1300 373 199(Australia) or 0508 123108(New Zealand) to connect you to the neare
Important Safety Instructions This manual explains the proper installation and use of your oven, please read it carefully before using even if you are familiar with the product. The manual should be kept in a safe place for future reference.
To reduce the risk of fire, do not place or install Do not use the door as a shelf. this unit in areas where the ventilation or Do not push down when the oven door is open. circulation ducts may become blocked. Make sure there are at least 70mm of space between the Grill back of your oven and the wall. Keep some may catch on fire. distance on each side of your oven that you can use that distance flowing installing instructions.
Product Description ¾ Model BO604B, BO604B-F A B C D E F A. Function Selection Knob D. Temperature Control Knob B. Oven Door Handle E. Heating Indicator Light C. Power Indicator Light F. Glass Door ¾ Model BO6602X-1, BO6602X-1F D A B E C F A. Function Selection Knob D. Temperature Control Knob B. Minute Timer Knob E. Heating Indicator Light C. Oven Door Handle F.
¾ Model BO610CX-1, BO610CX-1F Model BO610CX-2, BO610CX-2F A B C D E A. Function Selection Knob D. Electronic Control Panel B. Temperature Control Knob E. Glass Door C. Oven Door Handle BO610CX-2, BO610CX-2F Time Control Panel G H I J G. Function Display H. Control Buttons I. Increase Timer Value J.
N L M O L. Timer Override Light* M. Cooking Duration Function Indicator Light N. Cooking Delay Start Function Indicator Light O. Heating Indicator Light * When this light is ON, all timer functions are overridden and your oven will run in manual mode. Depress “OK” button for 3 seconds to enter into the manual mode.
Installation WARNING! Please follow the points below when installing the appliance available from the vinyl-wrap supplier. Use An Authorized Person As stated in the local municipal building codes caused by installation into low temperature Wiring connections must be in accordance with tolerant cabinets. After installation, test and ensure the appliance conditions of the local authority. operates correctly before handing it over to the Refer to data plate for rating information.
Cut-out dimensions Mounting Screw CAUTION! Your appliance must be mounted on a flat surface for the full width and depth of the product. Connect power supply cord Open terminal board cover at rear panel of appliance. Connect wires as below: Close the terminal board cover.
Start Using Your Oven Preparing Your Oven 1. Please remove all stickers, leaflets and boxes from the door and from the floor of the oven before operation. 2. Please wipe out the oven interior prior to operation with warm soapy water and polish dry with a soft clean cloth. Do not close the oven door until the oven is completely dry. 3. To remove the new cooker smell, heat up the oven when it is empty and closed. An hour of top/bottom heating at 240°C is ideal for this purpose.
Function Description 0 Oven Light Switch off function By setting the knob to this position the lighting inside the oven is switched on, e.g. use when washing the oven chamber. Fan & Combined Grill When the knob is turned to this position, the oven activates the combined grill and fan function. In practice, this function allows the grilling process to be speeded up and an improvement in the taste of the dish. You should only use the grill with the oven door shut.
Select the temperature ( All Models ) To select the desired temperature, push the “Temperature Control Knob” and the knob will pop up. Turn the knob in a clockwise direction to desired temperature (50°C ~ 250°C). A thermostat controls the temperature in your oven. Heating Indicator Light remains ON when heating the oven. Heating Indicator Light will turn OFF when the oven reaches set temperature. Once the food is cooked, turn the temperature selector back in an anti-clockwise direction.
¾ Model BO610CX-1 , BO610CX-1F, BO610CX-2, BO610CX-2F Your oven is equipped with a 3 button timer that has the following features: O’clock time – you can set current O’clock time Timer – you can set a countdown time that will beep when the set time has elapsed. Cooking duration – you can set cooking duration. A timer will count down the preset cooking time, beep when the time has elapsed and turn the appliance off.
Delayed Start Cooking Setting ¾ Before using this function, please make sure “Timer Over Ride” light is off. ¾ Press OK again after “Cooking Duration Setting” done till and “Hour” display flash together, use or key to adjust to required O’clock hours. Press OK again, “Minute” display flash, use or key to adjust to required O’clock minutes. Press OK again to confirm.
Maintenance and Cleaning WARNING! Before cleaning your oven, or performing maintenance, disconnect it from the power supply. Do not use steam cleaners. Do not line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the cooking and even damage the enamel.
Grill Always keep the grill dish and grill insert clean, as any fat deposits may catch fire. Replacement Of The Oven Light Bulb WARNING! In order to avoid the possibility of an electric shock ensure that the appliance is disconnected from the power supply before replacing the bulb. Set all control knobs to the “OFF” position (● / 0) and disconnect the mains plug. Unscrew and wash the lamp cover and then wipe it dry.
WARRANTY 1.1 In this warranty: 1.1.1 Australian Consumer Law means the law as set out in Schedule 2 of the Competition and Consumer Act 2010; 1.1.2 Company means GSM Sales Pty Ltd ABN 53 007 682 475 of 142-144 Fullarton Road, Rose Park SA 5067. Telephone 08 8122 2390. Email admin@gsmsales.com.au; 1.1.3 Consumer means a “consumer” as that term is defined in Section 3 of the Australian Consumer Law as the original purchaser of a Bellini product; 1.1.
1.8 You must provide proof of your purchase of the Bellini product and the date of purchase in order to obtain the benefit of this warranty. 1.9 If you live outside the service area of the Company or one of its service agents, this warranty does not cover the cost of transport of the Bellini product for service nor the service agent’s traveling costs to and from your home. 1.
