20131007 issue0 60cm Built In Jumbo Oven Installation and User manual Content Important Safety instructions-------------------- 2 Product description--------------------------------- 4 Installation-------------------------------------------- 7 Start using your oven------------------------------- 9 Maintenance and cleaning------------------------ 17 Warranty----------------------------------------------- 21 For warranty service call 1300 373 199(Australia) or 0508 123108(New Zealand) to connect you to the
Important Safety Instructions This manual explains the proper installation and use of your oven, please read it carefully before using even if you are familiar with the product. The manual should be kept in a safe place for future reference.
To reduce the risk of fire, do not place or install Do not use the door as a shelf. this unit in areas where the ventilation or Do not push down when the oven door is open. circulation ducts may become blocked. Make sure there are at least 70mm of space between the Grill back of your oven and the wall. Keep some may catch on fire. distance on each side of your oven that you can use that distance flowing installing instructions.
Product Description Control Panel of BDO608JTX, BDO608JTX-F Function knob Power indicator light Display Temperature setting knob Heater indicator light Power indicator light will turn on when the oven is connected to power supply Heater indicator light will turn on when heating element starts working Display 4
Control Panel of BDO610JEX, BDO610JEX-F You can press “Light” button to turn on/off oven light at anytime.
Technical Specifications BDO608JTX, BDO608JTX-F product dimensions electrical min. fuse max. power max. current (L x W x D) mm connection rating rating rating 595x595x540 220-240V/50Hz 15A 2970-3540W 14.75A Heating elements Motor Oven lower heating el.: 1200Watt Oven inside heating el. 2300 Watt Synchromotor 4 Watt Oven upper heating el.: 900Watt Total grill heating el. 900+2300 Watt Shaded motor (back) 32 Watt Oven light: Circle heating el.
Installation WARNING! Please follow the points below when installing the appliance available from the vinyl-wrap supplier. Use An Authorized Person As stated in the local municipal building codes caused by installation into low temperature Wiring connections must be in accordance with tolerant cabinets. After installation, test and ensure the appliance conditions of the local authority. operates correctly before handing it over to the Refer to data plate for rating information.
Cabinet Construction For Your Appliance resistant. In the case of veneered wood units, glues The sizes of the unit for installing the appliance under must be resistant to a temperature of 120°C. a worktop or in a column unit are shown in figure. Fitting Your Appliance Fit the appliance into its surround (beneath a work-top or above another appliance) by inserting screws into the 4 holes that can be seen in the frame of the oven when the door is open.
Start Using Your Oven Preparing Your Oven 1. Please remove all stickers, leaflets and boxes from the door and from the floor of the oven before operation. 2. Please wipe out the oven interior prior to operation with warm soapy water and polish dry with a soft clean cloth. Do not close the oven door until the oven is completely dry. Select the functions Turn the “Function Knob” in any direction to select the desired function.
Ventilated Max Grill The air which is heated by the grill heating element is circulated by the fan and so helps to distribute the heat between 50°C and 200°C. This function can be used for sterilizing glass jars. Ventilated & Lower The air which is heated by the lower heating element is circulated by the fan and so Heating Element helps to distribute the heat between 50°C and 200°C. This function can be used for sterilizing glass jars.
z Baked Cake Start the PIZZA cooking mode. This function is ideal for baking cakes. Place the food inside the oven while it is still cold. The dish may also be placed in a preheated oven. It will only be possible to adjust the duration by -10/+15 minutes. Meat Use this function to cook veal, pork, lamb and beef. Place the food inside the oven while it is still cold. The dish may also be placed in a preheated oven. It will only be possible to adjust the duration by -10/+10 minutes.
Select the temperature To set the temperature, turn the temperature selector in a clockwise direction to the desired setting. An indicator light above the temperature selector will come on. For BDO610JEX and BDO610JEX-F, temperature setting will appear on display when you turn the knob. A thermostat controls the temperature in your appliance. When the temperature is reached, the heating source switches itself off and the indicator light goes out.
Minute Minder Press “Function select button” until “ ” flashing. 1. Press “Minus/Plus” to set duration which range from 0.00 to 23.59. To cancel, set the duration as 0.00 2. Wait for 5s no further operation then setting is confirmed. This function does not interrupt cooking and does not affect the oven, it is simply used to activate buzzer when the set amount of time has elapsed. Cooking Duration Setting ” flashing. 1. Press “Function select button” until “AUTO” and “ 2.
Model BDO610JEX, BDO610JEX-F O’Clock Time Setting When the power is connected, the LED display shows 0:00 as default. 1. Press the button until the first numerical digit flashes on display and the and icons are switched off 2. Turn the TIMER KNOB towards “+” and “-“ to adjust the hour. 3. Press the button again so that the other two numerical digits on display flashes. Turn the TIMER KNOB towards “+” and “-“ to adjust the minute. 4. Press the button again to confirm.
Cooking advice table for ovens with an ExtraLarge Space cavity Function Foods Wt Cook (kg) on shelve No.
Automatic Bread (see recipe) bread Automatic Roasts 2 1 7*** 2 2 2 7*** 1 4 2 3 7*** 1 3 1 2 3 No 1 2 2 2 5 No 1 2 2 2 5 3 1 3 5 4 1 3 5 No 5 60-90** roast Automatic Desserts baked cakes Automatic pizza Pizza (see recipe) 35-60** 35-60** 23-30** No 6 25-35** 30-35** 35-40** * The cooking times listed above are intended as guidelines only and may be modified according to personal tastes.
Maintenance and Cleaning WARNING! Before cleaning your oven, or performing maintenance, disconnect it from the power supply. Do not use steam cleaners. Do not line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the cooking and even damage the enamel.
Grill Always keep the grill dish and grill insert clean, as any fat deposits may catch fire. Replacement Of The Oven Light Bulb WARNING! In order to avoid the possibility of an electric shock ensure that the appliance is disconnected from the power supply before replacing the bulb. Set all control knobs to the “OFF” position (● / 0) and disconnect the mains plug. Unscrew and wash the lamp cover and then wipe it dry.
Middle Layer Glass Removal The oven door is made up of 3 panes of glass and has vents at the top and bottom. When the oven is operating, air is circulated through the door to keep the outer pane cool. If condensation has worked its way in between the glass panes, the door can be dismantled in order to clean in between the panes. Remove the door as per above instruction and place it on a protective surface (e.g. on a table cloth) to prevent it getting scratched.
Troubleshooting In the event of an emergency, you should: Switch OFF all controls of the appliance Disconnect the mains plug Call the service centre Some minor faults can be fixed by referring to the instructions given in the table below. Before calling the customer support centre or the service centre check the following points that are presented in the table.
WARRANTY 1.1 In this warranty: 1.1.1 Australian Consumer Law means the law as set out in Schedule 2 of the Competition and Consumer Act 2010; 1.1.2 Company means GSM Sales Pty Ltd ABN 53 007 682 475 of 142-144 Fullarton Road, Rose Park SA 5067. Telephone 08 8122 2390. Email admin@gsmsales.com.au; 1.1.3 Consumer means a “consumer” as that term is defined in Section 3 of the Australian Consumer Law as the original purchaser of a Bellini product; 1.1.
1.8 You must provide proof of your purchase of the Bellini product and the date of purchase in order to obtain the benefit of this warranty. 1.9 If you live outside the service area of the Company or one of its service agents, this warranty does not cover the cost of transport of the Bellini product for service nor the service agent’s traveling costs to and from your home. 1.
