User's Manual

SI-CN

TR-CN

APP

Charging

Both the Transmitter and Receiver Units are supplied with built-in rechargeable

batteries. The batteries in both the Transmitter and Receiver Units must be

charged before using the products for the rst time.

Bellman Audio Domino Classic contains Lithium-Ion batteries and a universal

charger with plugs for the EU, United Kingdom, USA and Australia to suit the

majority of wall sockets used around the world.

Warning: The product may only be charged with the charger supplied or

using accessories from Bellman & Symfon.

Connect the charger as illustrated in the fold-out section of the manual.

Select the mains plug for the appropriate region and check that it is locked

properly before it is connected to the wall socket. When the charging connec-

tors are connected to the charger, the Transmitter Unit and the Receiver Unit,

the Battery Status LEDs (3 and 17) change from green to orange to indicate that

charging is taking place. When charging is nished, after about 2.5 hours, the

LEDs turn green again. You can charge one unit at a time or two at the same

time.

BE2250_001MAN005_book.indb 61 2017-06-13 16:42:04