User manual
PH 09 489 8100. FAX 09 448 1631. EMAIL sales@reidtechnology.co.nz. WEB www.reidtechnology.co.nz.
Features
Digital Signal Processing, DSP
Built in omnidirectional electret micro-
phone and zoom microphone
10 channel dynamic range compressor
10 channel dynamic noise suppression
Adaptive feedback manager
Intuitive user interface
LED light bar for excellent readability
9 step volume control (5 dB/step)
9 step tone control
Clear indication of Volume, Tone, Mic & T mode
Low battery warning indicator
Telecoil pickup for inductive loops
Push-to-listen mode (Int. mic and Aux in mixed)
Auxiliary stereo signal input (2.5 mm tele jack)
Headphones stereo output (3.5 mm tele jack)
Auto mute when switching between signal sources
Built-in rechargeable lithium-ion battery
Universal charger with included mains plug
BE9135 Neck strap with safety clasp included
Polished stainless steel belt clip included
Advanced settings
Balance control
Compensates for example for hearing
loss in one ear. 5 dB / step.
Basic attenuation
Limits the maximum output level
Useful for e.g. a child. 3 dB / step.
Stereo/Mono
used for neck loop and stetoclips.
Bass reduction
Reduces low frequency interference
from fans, road-noise etc.
Output using BE9124 Earphones
130
120
110
100
90
100 1000 10 000
Hz
dB re 20,0 µPa
dB SPL
130
120
110
100
90
80
70
100 1000 10 000
Hz
dB re 20,0 µPa
dB SPL
140
130
120
110
100
90
80
100 1000 10 000
Hz
dB re 20,0 µPa
dB SPL
Input signal
60 dB SPL 70 dB SPL 90 dB SPL
Input signal
60 dB SPL 70 dB SPL 90 dB SPL
Input signal
60 dB SPL 70 dB SPL 90 dB SPL
In-depth technical information
Subject to change without prior notice.
O
u
t
pu
t
us
in
g
B
E
9
1
2
4
E
a
rp
h
o
ne
s
Dimensions: 99 mm (h) x 48 mm (b) x 22 mm (d)
Weight: 2.5 ounces (74 grams)
Battery: Built in rechargeable lithium-ion, 617 mAh
Operating time: Up to 18 hours (fully charged)
Charging time:
2.5 hours (max)
Ext. Mic./Aux. in connector: 2.5 mm stereo tele jack
Headphones connector: 3.5 mm stereo tele jack
Volume control: 9 steps (5 dB/step)
Tone control: 9 steps
Mic and T mode: Separate mode select buttons
External microphone / Aux in
Selects automatically when plugged in
Dynamic Compressor
Dynamic gain range 0-35 dB
Compression 3:1
Expansion 1:1.5
Attack time 20 (25) ms (≥3 kHz)
Release time 110 (200) ms (>3 kHz)
Dynamic noise reduction
10 channel adaptive noise reduction
Feedback cancellation
Adaptive phase-invert feedback cancellation
Digital signal processing
22 050 kHz sampling frequency
16 bit resolution in stereo
Tone control blocking
Makes it easier for some end users
to handle Mino.
Tone control preset
Select preset tone. Used together
with Tone control blocking.
Disable T-coil
Makes it easier for some end users
to handle Mino.
Reset to factory settings
Resets all settings to the default
factory settings.
Output using BE9122 Headphones
Maximum output saturation
Using BE9122 Headphones
124.3 dB SPL (@ 2.5 kHz)
Using BE9124 Earphones
132.0 dB SPL (@ 5 kHz)
Using BE9125 Stetoclips
133.7 dB SPL (@ 1 kHz)
Gain, full volume
(1 kHz, 60 dB SPL input signal)
Using BE9122 Headphones
42.5 dB
Using BE9124 Earphones
55.0 dB
Using BE9125 Stetoclips
58.2 dB B
Gain, full volume
(HFA, 60 dB SPL input signal)
Using BE9122 Headphones
46.5 dB
Using BE9124 Earphones
51.5 dB
Using BE9125 Stetoclips
52.0 dB
Distortion
Using BE9122 Headphones
0.6 % THD
Using BE9124 Earphones
0.08 % THD
Output power tele-jack 100 mW w. 16 Ω last
Distortion 0.05 % THD
Dynamic range 90 dB
Frequency range 40 – 10 kHz
Tone control
Break point at 1.6 kHz
Tone, high: +10dB@3.15 kHz, -6dB@250Hz
Tone, low: -10dB@3.15 kHz, No bass boost
Line in sensitivity
0 dBV (maximum input level)
Output using BE9125 Stetoclips
27