User manual

PH 09 489 8100. FAX [phone]. EMAIL [e-mail]. WEB www.reidtechnology.co.nz.
CLINICAL PRODUCTS
Bite Blocks/10
Single use Styrofoam spacers hold
a patient’s mouth open and in a
comfortable position when taking
open jaw impressions.
PART NUMBER 20251
Anatomically correct models of the
external ear are ideal for learning how
to take impressions or to show patients
how earpieces and hearing instruments
interact with the ear. Available as a pair
only.
PART NUMBER 20221
BITE BLOCKS
DEMONSTRATION
EARS
FRISCH FRICOTAN
A+B, 30sh, yellow. Addition vulcanis-
ing silicone impression material with
very smooth consistency.
Mixing time : 30 – 90 seconds
Curing time : approx 4 – 6 mins
Storage : Room temperature
PART NUMBER 201010
DREVE OTOFORM KC
Dreve Otoform Kc A + 5ml hardener, 30shore, pink.
Smooth and non-sticky with a slight pressure forming
consistency.
Dreve Otoform AK 2 Potmix 255h green
OTOFORM AC PART NUMBER 35222
OTOFORM KC PART NUMBER 35021
Foam cone with safety thread to protect the ear drum during
impression-taking. The pads consist of exile foamed material.
The CIC pads are suitable for children or narrow auditory
canals.
Standard, red. Length 12mm 4.565
CIC, yellow. Length 7mm 4.566
COTTON DAMS
For sensitive ears or for deep canal
impressions. Dams come pre-tied.
Available in ve sizes
See price book for details
PRO VENTED DAMS
These dams are manufactured with a
ventilation tube that relieves air pressure
that can build up while impression material
is injected into the ear canal and when the
cured impression is removed. Supplied in
four sizes.
See price book for details
The manual injector enables a clean
and safe application of impression
materials with a stable pressure
PART NUMBER 20112
FOAM DAMS
MANUAL INJECTOR
8