Manual Babyfoonzender English Wijkermeerstraat 16 ● 2131 HA Hoofddorp T 023-5544011 ● F 023-555646 ● TT 023-5571610 E info@multicaresystems.nl ● I www.multicaresystems.
Introduction The Visit system consists of a number of radio transmitters and receivers. The transmitters detect different events in the surrounding area and transmit a radio signal to the receivers. The receivers pick up this signal and provide indications using light, sound and/or vibration. The transmitter determines what type of light, sound or vibration should be displayed so that the reason for the indication is evident. Read through the entire user manual first and then start to install the system.
Function General The BE1490 Visit Baby Cry Transmitter is a radio transmitter within the Visit System for indoor use, which recognises the sound from a crying baby. The Baby Cry Transmitter is activated by the built-in microphone and can transmit different signal patterns to the receivers in the Visit System. The sensitivity can be controlled via the sound sensitivity switch (4) and the delay time before the Baby Cry Transmitter transmits radio signals can be controlled via the delay switches (7).
Indicators and Signals System indicators The LED (1) lights up when the Baby Cry Transmitter transmits radio signals. Power supply When the Baby Cry Transmitter is activated, the LED (1) lights up green. This means that the battery is in good condition. If the LED (1) lights up yellow, this means that the battery is flat and must be changed. Only use an alkaline 6LR61 or a lithium 6F22 type battery. T roubleshooting in brief PRO BLEM N othing happens when the transmitter is activated.
T echnical illustration 1.LED. Combined transmission and battery indicator. For further information see Indicators and Signals 2.Microphone 3.Test button 4.Sound sensitivity switch 5.Wall mount bracket 6.Battery cover 7.Delay and signal switches 8.
