Operation Manual

Buttons and controls
In the box
 BE1441 Flash receiver or
BE1442 Flash receiver w. battery backup
 Power supply
 4 x 1.2 V AAA NiMH batteries
(BE1442 model only)
Power and battery
 Mains power
7.5 V DC / 1500 mA
External power supply unit
 Power consumption
Active: 1250 mA, idle position: 10 mA
 Backup batteries (BE1442 model only)
4 x 1.2 V AAA NiMH rechargeable
batteries
 Backup battery operating time
~ 48 h when fully charged
Accessories
 BE9075 Wall bracket
 BE1270 Bed shaker
 BE9251 Mobile phone sensor
 BE9105 Telephone cable
Frequency and coverage
 Radio frequency
314.91 MHz, 433.92 MHz or 868.30
MHz, depending on the region
 Coverage
50 – 250 m, 55 - 273 yd. depending
on the radio frequency and the
characteristics of the building
Output
 Built-in ~30 Candela Xenon light
Warning! Flashes can cause
epileptic attacks
Dimensions and weight
 Height BE1441: 140 mm, 5.5"
BE1442: 155 mm, 6.1"
 Diameter BE1441: 70 mm, 2.7"
BE1442: 78 mm, 3.1"
 Weight 310 g, 10.9 oz.
Visit LEDs
The Visit LEDs normally indicates
the following:
 Orange LED, pacier symbol
The baby monitor is activated
 Green LED, door symbol
The door transmitter is activated
 Yellow LED, telephone symbol
The phone transmitter is activated
 Red LED, re symbol
The smoke alarm is activated
Technical specications
Visit ash receiver
Mute / test button
FlashVisit LEDs
BE1442 batteriesPower LED Cable holder
BE1441
|
BE1442
1
2
3
4
3 1
42
1 - Power supply, 2 - BE9251 mobile phone sensor
3 - BE1270 bed shaker, 4 - BE9105 telephone cable