PVS-4207 Flat Panel Television Stand ASSEMBLY INSTRUCTIONS Patent No.
FOR YOUR SAFETY, PLEASE FOLLOW THESE PRECAUTIONS: ! ALWAYS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE ASSEMBLED UNIT. ! BE CAREFUL WHEN MOVING THE ASSEMBLED FURNITURE AFTER THE GLASS SHELVES HAVE BEEN INSTALLED, AND/OR WHEN THERE IS EQUIPMENT LOCATED ON THE FURNITURE AS THIS MAY CAUSE THE SHELVES TO BECOME UNSECURED AND FALL. ! WHEN IN USE, THIS FURNITURE MUST BE PLACED ON A FLAT, SOLID AND LEVEL SURFACE. ! DO NOT LEAN ON THE TV WHEN IT IS ON THE TV STAND.
Assembly Instructions NOTE: TWO PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS TABLE. A. STAND the rear CMS® (Cable Management System) frame (B) upright so that it is resting on the floor. NOTE: The TOP of the CMS® frame has two cut outs that should be facing up as shown in Fig. 1. B. ALIGN the bottom shelf frame (D) with the bolt holes located in the bottom sides of the CMS® frame (B) and ATTACH using four 35mm medium size screws (2) and the supplied Allen key. DO NOT TIGHTEN FULLY. Fig. 1 C.
Warranty One (1) Year Limited Warranty All Bell’O International products are warranted, with the exception of glass, to the original purchaser at the time of purchase and for a period of one (1) year thereafter. Glass is warranted to the original purchaser at the time of purchase and for a period of thirty (30) days thereafter. Warranty is only valid in the United States of America.
