Datasheet

PRODUCT SPECIFICATION
REVISION: ECR/ECN NUMBER: DOCUMENT NUMBER SHEET No.
B
.1
EK2017-0028
PS-70094-001
6 of 11
DATE: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
201
7
/
0
2
/
0
7
Kevin Miao
Ivanov
Wang
Ivanov
Wang
Form No.: QR-QP025-15 REV.: A
8
Terminal
Insertion Force
(into Housing)
Apply an axial insertion force on the
terminal at a rate of 25 ± 6 mm per minute.
14.7 N (3.3 lbf)
MAXIMUM insertion
force
9
Durability
Mate connectors up to 30 cycles at a
maximum rate of 10 cycles per minute prior
to Environmental Tests.
6 milliohms MAXIMUM
10
Vibration
(Random)
Mate connectors and vibrate per EIA 364-
28,test condition VII, Letter D. Test
Duration: 15 minutes each axis.
6 milliohms MAXIMUM
& Discontinuity < 1
microsecond
11
Shock
(Mechanical)
Mate connectors and shock at 50 g’s with
½ sine wave (11 milliseconds) shocks in the
±X,±Y,±Z axes (18 shocks total).
6 milliohms MAXIMUM
& Discontinuity < 1
microsecond
12
Wire Pullout Force
(Axial)
(Wire from
Terminal)
Apply an axial pullout force on the wire at a
rate of 25 ± 6 mm per minute.
MINIMUM pullout force
16 Awg: 88.0 N (19.8 lbf)
18 Awg: 88.0 N (19.8 lbf)
20 Awg: 57.8 N (13.0 lbf)
22 Awg: 35.5 N (8.0 lbf)
24 Awg: 26.6 N (6.0 lbf)
26 Awg: 13.3 N (3.0 lbf)
28 Awg: 8.9 N (2.0 lbf)
30 Awg: 6.6 N (1.5 lbf)
13
Pin to Header
Retention
Apply axial push force to pin at a rate of 25
±6 mm per minute.
13.7 N (3.1 Ibf)
MINIMUM pushout
force
14
Thumb Latch to
Ramp Yield
Strength
Full mate and then Unmate the connectors
at a rate of 25 ± 6 mm per minute.
45 N (10.125 lbf)
MINIMUM Yield
Strength