Datasheet

PRODUCT SPECIFICATION
REVISION:
ECR/ECN NUMBER:
DOCUMENT NUMBER
SHEET No.
1
EK2016-0203
PS-80210-001
4 of 8
DATE:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
2016 / 07/ 03
Kaysen Chen
Jerry Wang
Jerry Wang
TEMPLATE FILENAME: PRODUCT_SPEC REV 0.1,SHEET SIZE A4 20070830
5.2 ELECTRICAL REQUIREMENTS
ITEM
TEST DESCRIPTION
TEST CONDITION
REQUIREMENT
2
Contact
Resistance
(Low Level)
Mate connectors: apply a maximum
voltage of 20 mV and a current of
100 mA.
Measurement is made from the solder tail
of the receptacle to the soldering point of
the plug (including any internal paddle
cards, contacts and substrates of the plug
and receptacle).
Per EIA-364-23B
40 milliohms ,[initial]
MAX. PER CONTACT
10 milliohms MAX.
(change from initial)
3
Insulation
Resistance
Unmated & mated connectors: apply a
voltage of 500 VDC between adjacent
contacts.
Per EIA-364-21
100 Megohms MIN.
4
Dielectric
Withstanding
Voltage
Unmated & mated connectors: apply a
voltage of 100 VAC (RMS) for 1 minute
between adjacent contacts.
Per EIA-364-20
No Breakdown
5
Temperature Rise
Mate connectors:
Apply 5.0 A to VBUS pins and 1.25A to
VCONN pins with the return path through
the corresponding GND pins. A minimum
current of 0.25A shall also be applied
individually to all the other contacts.
The temperature rise above shall not
exceed 30℃ at any point on the mated
plug and receptacle under test.
The ambient condition is still air at 25℃
Per EIA-364-70, Method 2
Temperature rise:
+30℃ MAX.
5.3 MECHANICAL REQUIREMENTS
ITEM
TEST DESCRIPTION
TEST CONDITION
REQUIREMENT
6
Insertion Force /
Extraction Force
Mate connectors (male to female) at a
maximum rate of 12.5 mm per minute.
(this requirement does not apply when the
connectors are used in a docking
application)
Per EIA-364-13
Insertion force : 5-20N
Extraction force : 8-20N
up to 1,000 mating cycles
and within the range of 6 N to
20 N
7
Durability
10,000 cycles at a maximum rate of 200
cycles per hour.
Per EIA-364-09
No physical damage.
8
Cable Flexing
Flexing occur to the cable assembly with
Dimension X=3.7 times the cable diameter
and 100 cycles in each of two planes.
Per EIA 364-41, Condition 1
No physical damage
&
Discontinuity1 μs MAX.