Instruction manual
PARC
PARCPARC
PARC
PARC
PARCPARC
PARC
MOW 
MOW MOW 
MOW 
MOW 
MOW MOW 
MOW 
-
--
-
-
--
-
BIG
BIGBIG
BIG
BIG
BIGBIG
BIG
MOW 
MOW MOW 
MOW 
MOW 
MOW MOW 
MOW 
Con
ConCon
Conf
ff
figu
iguigu
igura
rara
rat
tt
tion: Options (1
ion: Options (1ion: Options (1
ion: Options (1)
))
) 
→ See the full explanations in the instruction manual ← 
√ : Option activated; - : Option deactivated 
Press “#” 
to activate
or deactivate
an
option
1.  Indication Menu (C to return to the Menu). 
2. 
Type “# ▼” Settings “# ” Options “#” (that is “# ▼#  #”). 
3.  Indication Option 1: O01:GoToChge. 
•  Multi-charging station O00 MultiSta 
Multi-station mode enables several stations to be managed with one or several robot. 
  O00 MultiSta: - The 
BIGMOW-PARCMOW only returns to a normal station 
  O00 MultiSta: √ The 
BIGMOW-PARCMOW only returns to stations configured as Multi-station 
If this option is validated, the machine no longer returns to its ‘normal’ station.  
•  Immediate return to the charging station O01 GoToChge  
Forces the machine to return immediately to its charging station.  
1.  Indication Menu (C to return to the Menu) 
2.  Shortcut “F1” (see p.20) 
  O01 GoToChge: - The 
BIGMOW-PARCMOW does not return to its station and works normally 
  O01 GoToChge: √ The 
BIGMOW-PARCMOW returns to its station 
When the option O01 Return to the charging station is selected, the machine will start up again after full  
recharge. 
•  Wait at the station after charge O02 Stay@Chge 
Forces the machine, after the end of its cycle, to stay at its station and not leave it again. 
Also see the commands summarised at the end of the manual
. 
1.  Indication 
Menu (C to return to the Menu) 
2.  Shortcut “F2” (see p.20) 
  O02 Stay@Chge: - The 
BIGMOW-PARCMOW does not return to its station and works normally  
  O02 Stay@Chge: √ The 
BIGMOW-PARCMOW returns to its station and stays there 
When option O02 Stay at the charging station is selected, the machine will not start up until this option is 
cancelled . 
To force the machine to start working again, press
 and close the cover (the machine has to be in 
contact with the station automatically
 ) 
PAGE 17 










