Instruction manual

PARC
PARCPARC
PARC
PARC
PARCPARC
PARC
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
-
--
-
-
--
-
BIG
BIGBIG
BIG
BIG
BIGBIG
BIG
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
Configuration : Options (3)
Configuration : Options (3)Configuration : Options (3)
Configuration : Options (3)
→ See the full explanations in the instruction manual ←
√ : Option activated; - : Option deactivated
Press “#” to activate or deactivate an option
• Inversion of phase. O08 PhiInv
Enables inversion of the detection of the peripheral wire field.
O08 PhiInv: - Depending on the phase of the terrain
O08 PhiInv: √ Depending on the phase of the terrain
To verify the phase of the terrain, use the F3 function: see debug, the indication of the phase must be positive. (Φ
ΦΦ
Φ+)
• Inversion left cutting head. O09 HeadRotInv
Make the left cutting trays turn in the opposite direction to avoid grass jam.
O09 HeadRotInv: - The heads of the BIGMOW-PARCMOW turn in the same direction
O09 HeadRotInv: √ The heads of the
BIGMOW-PARCMOW turn 3 times in one direction  and twice in
the other.
• Direction of return to the station: Anti-clockwis O10 CCWSeek
In random mode, force the machine to return to its charging station in an anti-clockwise or clockwise
direction.
O10 CCWSeek: - The BIG MOW- PARC MOW returns in a clockwise direction  to return to the station
O10 CCWSeek: √ The
BIG MOW- PARC MOW returns in an anticlockwise direction  to return to the
station
The machine returns to its station following its peripheral wire at a distance of approximately 1 metre
• Charging the machine from both sides O11 Chge2Sides
Allows the machine to return to its charging station in both directions (clockwise and anti-clockwise) and
cancels option 010 CCWSeek.
O11 Chge2Sides: - The BIG MOW- PARC MOW returns to the station in one direction (that of option 9)
O11 Chge2Sides: √ The
BIG MOW- PARC MOW returns to the station in both directions (1*  , 1*  )
Option 10 is of no use in this configuration
• Mode capture de la station O12 EnCapture
The machine returns to charge, if necessary, by passing in front of its station, it passes it, and then makes a half turn
before placing itself on its wire and entering the station. This saves time following the peripheral wire.
O12 EnCapture: - It returns to station following its wire when the batteries are low
O12 EnCapture: √ Station sensor mode when the batteries are nearly low
Make a half turn after its station to charge, not taking into account option 13
• Return to the station mode O13 Udocking
If the option is selected, the machine returns to charge itself, by passing in front of its station, it passes it,
and then makes a half turn before coming to position itself on its wire and entering the station.
O13 Udocking: - It returns to station by placing itself directly on its wire once the station is detected
O13 Udocking: √
It returns to station by passing in front of the station, it passes it, and then makes a half turn
coming to position itself on its wire and entering the station
PAGE 19