Instruction manual

PARC
PARCPARC
PARC
PARC
PARCPARC
PARC
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
-
--
-
-
--
-
BIG
BIGBIG
BIG
BIG
BIGBIG
BIG
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
Safety alert: Error message
PAGE 23
CODE MEANINGS REMARQUES
Al01→
→Al31
Blocked head(s) (1, 2, 3, 4, 5)
Indication on the screen
→ Check the cutting components
Al32→
→Al35
Left and/or right wheel blocked
Indication on the screen
→ Check the driving components
Al36→
→Al39
Body
in left and/or right collision
Impact sensors
→ Check the body impact components
Al40→
→Al43
Tactile sensor (touch flange)
in left and/or right collision
Touch tyre flange
→ Check the red pressure gauge connected in the
Al44 Code expired Follow the code entering procedure
→ See manual page...
Al45
Battery too discharged → Put the machine on the station manually, and
start it again manually 2 hours later
Al46 No Peripheral Signal Check at the charging station
Al47
Station not found The machine has not found its station after
a tour of the terrain (function of the P01)
→ Check P01, verify sonar machine (if it slowed
down), check the sonar station (if the machine
slowed down on approaching the station)
Al48
Outside wire boundary
→ Check O03: demo mode; O08: inversion phase;
P00: intensity at 30
Al49
Wire lost
The machine stops when seeking its wire
after 6 m
Al50 No way out path Blocked at this location after several close
manoeuvres
Al51
Slipping Distance travelled greater than P01
→ Check the state of the terrain, check P01
Al52
Blocked on wire → Check O08: investment phase
Al53
Fuse. Power surge Battery fuse broken OR main switch on
OFF when charging
Al55 Loss of Charging? Loss of charging on the station
AL56
Charge contact? The machine has detected the station but
AL57 Bat Temp Sensor Problem with the temperature sensor