Operator`s manual

Belshaw Bros., Inc.  www.belshaw.com  Phone [phone]  Fax [phone]
6 MN-1143EN 718L/724/734CG Gas Fryers TS
2 Maintenance
SB-0308 rev 3
AFFECTS: OPEN KETTLE FRYERS
PURPOSE: PROGRAMMING THE OGDEN ETR-9000 TEMPERATURE CONTROLLER
NOTE: Use Rev. 3 to correct existing open Kettle Fryer settings.
(SP1L set to 0 & PB set to 0)
Operator Interface:
The operator interface on the Ogden ETR-9000, Temperature Controller, consists of the following:
 A scroll key
used to select a parameter to be viewed or adjusted.
 Up
and down arrow keys are used to increase or decrease the selected parameter.
 A reset key
used to return to normal operation mode.
Figure 1 – Operator Interface Description