- Belshaw Bros. Operator's Manual Fill and Filter EZ18, EZ24, EZ34

Thoroughly clean your EZ Melt before using it.
Refer to Section 3, “Cleaning,” for cleaning
instructions.
WARNING
Moisture causes hot shortening to spatter,
which may cause serious injury. Thoroughly
dry the kettle and any other parts you wash.
WARNING
To avoid electrocuting yourself or damaging
the EZ Melt, never allow water, steam,
cleaning solution, or other liquid to enter the
heater head.
Make sure that the power requirements of the EZ
Melt, shown on the data plate, match your power
source.
Belshaw Bros., Inc.  1750 22
nd
Ave. S.  Seattle, WA 98144  Phone [phone]  Fax 206-322-
5425
4 MN-1316EN EZ Melt Model EZ18, EZ24, EZ34