Operator`s manual

Belshaw Bros., Inc.  1750 22
nd
Ave. S.  Seattle, WA 98144  Phone [phone]  Fax 206-322-
5425
Thermoglaze 25 MN-1726EN 15
13. Remove the glaze pump cover and
gasket.
14. Remove the pump body and gear
impellers.
15. Remove the gear impellers from the
pump body.
16. Clean the pump shaft splines thoroughly
to prevent the gear from sticking onto the
shaft during assembly.
Note: Allow the oven to cool below 130 deg F.
before disassembling the oven or conveyor.
17. Pull the conveyor drive coupling back to
release the conveyor.